Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...
Strutmasters 1986-1990 Buick LeSabre 4 Wheel Air Suspension Conversion Kit is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use standard shocks/struts and coil springs for less than the price of replacing one air strut.
Conversion Kit Features
- Saves Money
- All New Components
- Improved Ride
- More Reliable Than Air Suspensions
- No Modifications Required To Install
- Easy To Install
- Premium Eibach Springs
Air Suspension Conversion Kit Includes
- 2 Complete Front Strut Assemblies, With New Mounts And Springs
- All Necessary Hardware
- 2 Rear Eibach Springs
- 2 Premium Rear Shock Absorbers
- Detailed Instructions
This Conversion Kit Fits
1986 Buick LeSabre, 1987 Buick LeSabre, 1988 Buick LeSabre, 1989 Buick LeSabre, 1990 Buick LeSabre
- If the suspension warning light is currently on, call 866-597-2397 for more information prior to installation.
Additional Suspension Information
Savings With the StrutmastersReady to Order
After Market Replacement Parts:
+ Front Electronic Air Strut ($599.00/pair)
+ Compressor ($200)
+ Dryer Assembly ($40.00)
= TOTAL: Over $1,430 (and that still doesn’t include replacing electronic components that are known to fail such as the height sensors).
Strutmasters Conversion Kit:
+ 2 x Pre-Assembled Complete Front Strut Assemblies Including Springs And Mounts
+ 2 Premium Rear Shock Absorbers
+ 2 Rear Eibach Springs
+ Detailed Installation Instructions
+ Over-The-Phone Technical Support And A Limited Lifetime Warranty
Our Strutmasters Conversion Kit is only $599.00(plus s&h)!!!!
Is Your Suspension Failing? Ready to Order
How do I know if my 1986-1990 Buick LeSabre Air Suspension is failing?
If the Buick LeSabre is not meeting and maintaining its proper ride height, it may have a failed or leaking air suspension system. Look for these common signs so you can properly diagnose a bad suspension before total failure sets in. The most noticeable is a sudden uneven height difference between different sides of the LeSabre. Typically the rear end will sag while the front end remains inflated. This makes the LeSabre look as though it is squatting down lower than it should. Many drivers notice a lean from one side to the other, too. In either case, you will want the vehicle fixed ASAP before other components wear out. For example, the air compressor may run too often (loud and noisy) or may have stopped working completely. A repair or replacement suspension system may be necessary if you notice an illuminated suspension warning light on the instrument cluster. You have plenty of options on the market, but they may not all offer the high quality and affordability of our kits. Read on to learn more.
Why Choose Strutmasters?Ready to Order
Why choose the Conversion Kit over replacing the air suspension system on your 1986-1990 Buick LeSabre?
We designed an air to non-air suspension conversion kit specifically for the 86-90 Buick LeSabre. The kit saves the LeSabre owner time, money, and frustration when the air suspension system goes bad. It eliminates your former dependency on each individual electronic component functioning in sync. The kit is a direct replacement solution- no modifications needed before it is installed on your LeSabre. The kit includes two shock absorbers, two coil springs, and two completely pre-assembled coil-over struts. DIYers love how easily it is installed- it takes as little as one hour per wheel, thanks to the detailed instruction manual that comes with. Never deal with the headache of the dealership repair again- convert your suspension today.
5 Great Reasons To Act Now
- 1986-1990 Buick LeSabre Conversion Kits Save You Money
- Limited Lifetime Warranty
- Quick And Easy Installation
- Made In The USA
- Frustration Eliminated Forever!
Vehicle ComponentsReady to Order
What kind of suspension does my 1986-1990 Buick LeSabre have?
The 1986-1990 Buick LeSabre is built with the following suspension components:
1986-1990 Buick LeSabre Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The 1986-1990 Buick LeSabre struts, while having coil-springs, use an electronic signal to stiffen or soften the dampening of the strut.
1986-1990 Buick LeSabre Shock Absorbers (x2)- a metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle..
1986-1990 Buick LeSabre Height Sensors (x2)- a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out.
1986-1990 Buick LeSabre Air Lines- tubes that run from a compressor (air suspension) to the air struts which carry pressurized air to the air bags components in order to adjust the height of the vehicle, respectively.
1986-1990 Buick LeSabre Control Module (x1)- a computer which is responsible for the operations of the air suspension system and maintaining the vehicle’s correct ride height.
1986-1990 Buick LeSabre Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicle’s correct ride height.
Ready to Order!?
Don't wait another minute to get your car running in top condition. Order now!
Related Air Suspension Videos
Click any video below to review the Strutmasters video related to this or other products.