Info and Resources
Learn everything you need to know about this product.
Learn more about what this product does and why you may need it.
Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...
Strutmasters 1989-1993 Dodge Dynasty Front Air Suspension Conversion Kit is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use standard shocks/struts for the price of one air shock.
Conversion Kit Features
- Saves Money
- All New Components
- More Reliable Than Air Suspensions
- No Modifications Required To Install
- Easy To Install
Air Suspension Conversion Kit Includes
- 2 Complete Pre-Assembled Front Strut Assemblies With New Mounts And Springs
- Detailed Instructions
This Conversion Kit Fits
1989 Dodge Dynasty, 1990 Dodge Dynasty, 1991 Dodge Dynasty, 1992 Dodge Dynasty, 1993 Dodge Dynasty
How Does Strutmasters Measure Up?
After Market Replacement Parts:
+ Struts ($215/strut)
+ Air Shocks ($265/Air Shocks)
+ Coil Springs ($179/Coil Springs)
+ Compressor and Dryer Assembly ($235)
= TOTAL: Over $1,550! (That doesn’t even include replacing electronic components that are known to fail such as the height sensors).
Strutmasters Conversion Kit:
+ 2 x front Eibach coil springs
+ 2 x rear Eibach coil springs
+ 4 x 2 inch lift blocks
+ detailed installation instructions
+ over-the-phone technical support and a Limited Lifetime Warranty
- Our Price: $329.00!
Learn why Strutmasters is the best choice for your new kit.
Why Choose Strutmasters?
Why choose the Conversion Kit over replacing the air suspension system on your 1989-1993 Dodge Dynasty?We are proud to be called The Suspension Experts. We know about the complicated electrical parts that make up your Dodge Dynasty air suspension system. We also know they fail easily. That’s why we created our non-air suspension conversion kits. Our customers tell us the main reason they make the switch from air suspension to one of our non-air suspension conversion kits is the low price. It’s much more affordable than direct replacement of air suspension at the dealership. The kit simplifies your suspension. It includes two pre-assembled complete front struts with premium springs. The kit is installed with ease- it takes about one hour per wheel and our pictorial instruction manual was put together with our DIYers in mind! This kit saves you money, and precious time. See what car owners are raving about, and convert your suspension with our quality kit.
Is Your Suspension Failing?
How do I know if my 1989-1993 Dodge Dynasty Air Suspension is failing?There are common signs of a failed or leaking air suspension in your 1989-1993 Dodge Dynasty that you need to be aware of. The most obvious is a sudden noticeable height difference between different sides of the Dynasty. This might be a sagging rear or front, it may be an inflated side, there could be leaning from left to right, or maybe the entire vehicle looks to be squatting too low to the ground. All of these likely mean a bad suspension. Inside the Dynasty, check your instrument cluster. Is there an illuminated suspension warning light or message? That is an obvious sign, but we had to mention it! Also, check other major components that could wear out if you have suspension total failure. The air compressor is a big one- is it still working? Is it running too often (will be very noisy)? It’s more than likely, in any of these scenarios, that you will need a suspension repair or replacement. If you have suspension failure, your Dynasty won’t be able to consistently maintain its proper ride height. This renders it unsafe and unfit to put on the road. You will want to get the problems fixed as soon as possible. Continue reading to learn more about our unique solution.
What kind of suspension does my 1989-1993 Dodge Dynasty have?
1989-1993 Dodge Dynasty Air/Electronic/Magnetic Shock Absorbers (x2)- shocks that contain an air bladder or magnets whose dampening capabilities are controlled by the suspension control module.
1989-1993 Dodge Dynasty Air Struts (x2)- struts that contain an air bladder whose dampening capabilities is controlled by the suspension control module; these have two functions. They connect the wheel of a vehicle to the driving surface in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. They also help maintain the vehicles correct ride height, especially whenever the amount of load put onto the vehicle changes.
1989-1993 Dodge Dynasty Air Springs (x2)- commonly referred to as air bags, a plastic and rubber bag that is fitted on top of the strut that uses pressurized air as a cushion instead of a metal coil spring to hold a vehicle off of the ground and off of its wheels. These are the number one cause of all air suspension leaks. All air springs all go bad at about the same rate. If one is leaking, the others will not be far behind. For a proper repair, all of them need to be replaced at the same time.
1989-1993 Dodge Dynasty Height Sensors (x2)- a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out.
1989-1993 Dodge Dynasty Air Lines- tubes that run from a compressor (air suspension) to the air struts which carry pressurized air to the air bags components in order to adjust the height of the vehicle, respectively.
1989-1993 Dodge Dynasty Compressor- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive.
1989-1993 Dodge Dynasty Dryer Assembly- used to keep moisture out of air lines and air springs in order to prevent freezing and internal cracking of these parts. Once air suspension starts leaking, moisture will build-up throughout the air system. Moisture damages the air suspension from the inside. The dryer will need to be replaced in order to eliminate the moisture and prevent any further damage.
1989-1993 Dodge Dynasty Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicle’s correct ride height.
1989-1993 Dodge Dynasty O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.
Reviews and Videos
Read what customers like you thought of our product.
There are currently no reviews for this product
Watch helpful installation and walkthrough videos.
Ready to Order
Don't wait another minute to get your vehicle running in top condition. Order now to save big!