Description Product Description

Kit Class: Premium Warranty: Lifetime

Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...

Strutmasters 1990-1993 Chrysler Imperial 4 Wheel Air Suspension Conversion Kit With Shocks is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your Air suspension to use standard shocks/struts for the price of one air shock.

Conversion Kit Features

  • Saves Money
  • All New Components
  • More Reliable Than Air Suspensions
  • No Modifications Required To Install
  • Easy To Install

Air Suspension Conversion Kit Includes

  • 2 Complete Pre-Assembled Front Strut Assemblies With New Mounts And Springs
  • 2 Rear Eibach Coil Springs
  • 2 Rear Shocks
  • Detailed Instructions

This Conversion Kit Fits

1990 Chrysler Imperial, 1991 Chrysler Imperial, 1992 Chrysler Imperial, 1993 Chrysler Imperial

Product Notes

  • None.

Additional InfoAdditional Suspension Information

long-icon-savingsSavings With the StrutmastersReady to Order

After Market Replacement Parts:

+ Struts ($215/strut)
+ Air Shocks ($265/Air Shocks)
+ Coil Springs ($179/Coil Springs)
+ Compressor and Dryer Assembly ($235)
= TOTAL: Over $1,550 (and that doesn’t even include replacing electronic components that are known to fail such as the height sensors).

Strutmasters Conversion Kit:

+ 2 Complete Pre-assembled Front Strut Assemblies With Eibach Springs
+ 2 Rear Shocks
+ 2 Rear Eibach Springs
+ Detailed Installation Instructions
+ Over-The-Phone Technical Support And A Limited Lifetime Warranty =

Our Strutmasters Conversion Kit is only $555.00(plus s&h)!!!!

long-icon-xIs Your Suspension Failing? Ready to Order

How do I know if my 1990-1993 Chrysler Imperial Air Suspension is failing?

The following signs indicate a failed or leaking air suspension system on the 1990-1993 Chrysler Imperial. Early detection of a bad suspension is the key to avoiding total failure. Look for a sudden uneven height difference between different sides of the vehicle. A sagging rear or front end is commonly seen. This gives the illusion the Imperial is squatting down in the rear. A shifting lean from one side to the other is also common. Any inability of the Imperial to reach and maintain its proper ride height is a red flag that should be fixed. If left untreated, these imbalances can wear out the air compressor. If a suspension warning light is illuminated on the dashboard, suspension failure is advanced. The Imperial owner will need an expensive direct replacement or repair.

long-icon-questionWhy Choose Strutmasters?Ready to Order

Why choose the Conversion Kit over replacing the air suspension system on your 1990-1993 Chrysler Imperial?

Strutmasters' air to non-air suspension conversion kit is an affordable replacement alternative to dealership repair when the air suspension system has failed on the 90-93 Chrysler Imperial. Customers tell us the reason they make the switch to our air to non-air suspension conversion kit is the low price and high quality of the kit. Manufactured in America, the kit includes two pre-assembled complete front struts with premium springs, two premium rear shock absorbers, and two premium Eibach springs. This is the only kit of its kind that includes cold-wound steel Eibach springs! Thanks to detailed instructions and installation videos on our website, the kit is installed in about one hour per wheel. Overall, the kit saves customers time, frustration, and a ton of money.

5 Great Reasons To Act Now

  • 1990-1993 Chrysler Imperial Conversion Kits Save You Money
  • Limited Lifetime Warranty
  • Quick And Easy Installation
  • Made In The USA
  • Frustration Eliminated Forever!

long-icon-gearVehicle ComponentsReady to Order

What kind of suspension does my 1990-1993 Chrysler Imperial have?

The 1990-1993 Chrysler Imperial is built with the following suspension components:


1990-1993 Chrysler Imperial Air Shock Absorbers (x2)- shocks that contain an air bladder whose dampening capabilities are controlled by the suspension control module.


1990-1993 Chrysler Imperial Air Struts (x2)- struts that contain an air bladder whose dampening capabilities is controlled by the suspension control module; these have two functions. They connect the wheel of a vehicle to the driving surface in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. They also help maintain the vehicles correct ride height, especially whenever the amount of load put onto the vehicle changes.


1990-1993 Chrysler Imperial Coil-over Struts (x2)- some models come with these instead of front air struts; a type of shock absorber, it is a piece of metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. Coil springs fit around the top portion of the struts and hold the vehicle up, they are rated for and designed to work with the rest of the suspension system.


1990-1993 Chrysler Imperial Air Springs (x2)- commonly referred to as air bags, a plastic and rubber bag that is fitted on top of the strut that uses pressurized air as a cushion instead of a metal coil spring to hold a vehicle off of the ground and off of its wheels. These are the number one cause of all air suspension leaks. All air springs all go bad at about the same rate. If one is leaking, the others will not be far behind. For a proper repair, all of them need to be replaced at the same time.


1990-1993 Chrysler Imperial Height Sensors (x2)- a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out.


1990-1993 Chrysler Imperial Air Lines- tubes that run from a compressor (air suspension) to the air struts which carry pressurized air to the air bags components in order to adjust the height of the vehicle, respectively.


1990-1993 Chrysler Imperial Compressor- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive.


1990-1993 Chrysler Imperial Dryer Assembly- used to keep moisture out of air lines and air springs in order to prevent freezing and internal cracking of these parts. Once air suspension starts leaking, moisture will build-up throughout the air system. Moisture damages the air suspension from the inside. The dryer will need to be replaced in order to eliminate the moisture and prevent any further damage.


1990-1993 Chrysler Imperial Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicle’s correct ride height.


1990-1993 Chrysler Imperial O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.


Ready to Order!?

Don't wait another minute to get your car running in top condition. Order now!

Quantity:

Related VideosRelated Air Suspension Videos

ReviewsSuspension Kits Reviews