Info and Resources
Learn everything you need to know about this product.
Learn more about what this product does and why you may need it.
Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...
Strutmasters 1991-1999 Buick LeSabre 4 Wheel Air Suspension Conversion Kit is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use standard shocks/struts and coil springs for less than the price of replacing one air strut.
Conversion Kit Features
- Saves Money
- All New Components
- Improved Ride
- More Reliable Than Air Suspensions
- No Modifications Required To Install
- Easy To Install
- Premium Eibach Springs
Air Suspension Conversion Kit Includes
- 2 Complete Front Strut Assemblies, With New Mounts And Springs
- All Necessary Hardware
- 2 Rear Eibach Springs
- 2 Premium Rear Shock Absorbers
- Detailed Instructions
This Conversion Kit Fits
1991 Buick LeSabre, 1992 Buick LeSabre, 1993 Buick LeSabre, 1994 Buick LeSabre, 1995 Buick LeSabre, 1996 Buick LeSabre, 1997 Buick LeSabre, 1998 Buick LeSabre, 1999 Buick LeSabre
- If the suspension warning light is currently on, call 866-597-2397 for more information prior to installation.
How Does Strutmasters Measure Up?
1991-1999 Buick LeSabre OEM Replacement Parts:
+Air Struts ($469/Air strut)
+ Air Shocks ($259/air shocks)
+ Compressor and Dryer Assembly ($320)
= TOTAL: Over $2,700 (and that doesn’t even include replacing electronic components that are known to fail such as the height sensors).
After Market Replacement Parts:
+ Front Air Strut Assemblies ($469/pair)
+ Rear Air Strut Assemblies ($469/pair)
+ Compressor ($320)
+ Dryer Assembly ($40.00)
= TOTAL: Over $1,900 (and that still doesn’t include replacing electronic components that are known to fail such as the height sensors).
Strutmasters Conversion Kit:
+ 2 x Pre-Assembled Complete Front Strut Assemblies Including Springs And Mounts
+ 2 x Premium Rear Shocks
+ 2 x Rear Eibach Springs
+ Detailed Installation Instructions
+ Over-The-Phone Technical Support And A Limited Lifetime Warranty =
- Our Price: $599.00!
Learn why Strutmasters is the best choice for your new kit.
Why Choose Strutmasters?
Why choose the Conversion Kit over replacing the air suspension system on your 1991-1999 Buick LeSabre?
This air to non-air suspension conversion kit (CA24F) was built specifically for the 91-99 Buick LeSabre. Created with our DIYers in mind, this kit saves you time, frustration, and a ton of money. In fact, the relatively low price is what makes most of our customers switch to the kit. Scroll up to review the price comparisons between the conversion kit, direct replacement at the dealership, and aftermarket part installation. The kit includes only high-quality parts and is the only one on the market with cold-wound steel Eibach coil springs. The kit comes with two pre-assembled complete front strut assemblies with springs and mounts, two premium rear shocks and two rear Eibach springs. It is installed in as little as one hour per wheel, saving you lots of time. Detailed installation instructions will help you get your ride working in no time.
Is Your Suspension Failing?
How do I know if my 1991-1999 Buick LeSabre Air Suspension is failing?
If it is not meeting and maintaining its proper ride height, your 91-99 Buick LeSabre has a failed or leaking air suspension system. You’ll want to diagnose a bad suspension system quickly before total failure sets in. The most noticeable sign is a sudden uneven height difference between different sides of the LeSabre. Typically the rear end will fail first causing it to sag while the front end remains inflated. This squatting down appearance can be coupled with a leaning from side to side. If the problem continues without being fixed, other components will wear out. The air compressor, for example, may stop working or may run too often (in this case it will be very loud or noisy). A suspension repair or replacement may be necessary if there is an illuminated suspension warning light or message on the instrument panel. Do not take any of these signs lightly- you do have options but you need to act quickly.
What kind of suspension does my 1991-1999 Buick LeSabre have?
The 1991-1999 Buick LeSabre is built with the following suspension components:
1991-1999 Buick LeSabre Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The Buick LeSabre’s struts, while having coil-springs, use an electronic signal to stiffen or soften the dampening of the strut.
1991-1999 Buick LeSabre Height Sensors (x2)- a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out. .
1991-1999 Buick LeSabre Air Lines- tubes that run from a compressor (air suspension) to the air struts which carry pressurized air to the air bags components in order to adjust the height of the vehicle, respectively.
1991-1999 Buick LeSabre Solenoids (x4)- usually L-shaped, these plastic components connect the electrical connection and lines of suspension components to the suspension control module on vehicles with active suspension. The solenoid regulates the air pressure for each air spring. Solenoids start to leak as they wear out causing the vehicle to sag or to lean. This will cause the ride height sensor to send a signal to activate the compressor in an attempt to inflate the air suspension and level out the vehicle. This excessive work load will eventually lead to total failure of the compressor.
1991-1999 Buick LeSabre Compressor- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive.
1991-1999 Buick LeSabre Dryer Assembly- used to keep moisture out of air lines and air springs in order to prevent freezing and internal cracking of these parts. Once air suspension starts leaking, moisture will build-up throughout the air system. Moisture damages the air suspension from the inside. The dryer will need to be replaced in order to eliminate the moisture and prevent any further damage.
1991-1999 Buick LeSabre Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicle’s correct ride height.
1991-1999 Buick LeSabre O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.
How does this part compare to OEM parts and other competitive solutions?
Less Than Dealer
Reviews and Videos
Read what customers like you thought of our product.
There are currently no reviews for this product
Watch helpful installation and walkthrough videos.
Ready to Order
Don't wait another minute to get your vehicle running in top condition. Order now to save big!