Info and Resources
Learn everything you need to know about this product.
Learn more about what this product does and why you may need it.
Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...
Strutmasters 1992-2000 Ford Crown Victoria Premium 4 Wheel Air Spring To Coil Spring Conversion Kit With Front And Rear Shock Absorbers is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use standard shocks/struts and coil springs for less than the price of replacing one air strut.
Conversion Kit Features
- Saves Money
- All New Components
- Returns Vehicle To Factory Ride Height
- More Reliable Than Air Suspensions
- No Modifications Required To Install
- Easy To Install
Air Suspension Conversion Kit Includes
- 2 Front Shock Absorbers
- 2 Front Properly Rated Coil Springs
- 2 Rear Shock Absorbers
- 2 Rear Eibach Springs
- All Necessary Hardware
- Detailed Instructions Including How To Disable The Suspension Warning Light
This Conversion Kit Fits
1992 Ford Crown Victoria, 1993 Ford Crown Victoria, 1994 Ford Crown Victoria, 1995 Ford Crown Victoria, 1996 Ford Crown Victoria, 1997 Ford Crown Victoria, 1998 Ford Crown Victoria, 1999 Ford Crown Victoria, 2000 Ford Crown Victoria
- If The Front Suspension Is Sagging, Then Add The Front Springs To Your Order
How Does Strutmasters Measure Up?
1992-2000 Ford Crown Victoria OEM Replacement Parts:+ Rear Air Springs ($630/air spring)
+ Compressor Assembly ($790)
+ Dryer ($230)
+ Rear Shocks ($50)
+ Front Shocks ($90)
+ Front Coil Springs ($170/pair)
= Over $2,900 (and that doesn’t even include replacing electronic components that are known to fail such as the height sensors).
After Market Replacement Parts:+ Rear Air Springs ($90/air spring)
+ Shocks ($30)
+ Compressor Assembly w/ Dryer ($210)
+ Front Coil Springs ($96/pair)
= Over $500 (but that doesn’t include replacing electronic components that are known to fail such as the height sensors).
Strutmasters Conversion Kit:+ (4) OE-Style Shocks
+ (2) Replacement Front Coil Springs
+ (2) Rear Eibach Coil Springs
+ Detailed installation instructions
+ Over-the-phone technical support
+ Limited Lifetime Warranty =
- Our Price: $349.00!
Learn why Strutmasters is the best choice for your new kit.
Why Choose Strutmasters?
Why choose the Conversion Kit over replacing the air suspension system on your 1992-2000 Ford Crown Victoria?
The 1992-2000 Ford Crown Victoria’s air suspension system is made up of a variety of complicated parts. They all need to function in sync in order for the suspension to be working properly. We are The Suspension Experts, so we knew there was a better solution. We created a kit that eliminates the dependency on faulty air suspension parts. This kit includes four replacement shocks, two replacement coil springs for the front of the Crown Victoria and two Eibach coil springs to remove the airbags in the rear. Our kits are the only ones on the market that use high-quality Eibach springs. The parts are so reliable, we offer our limited lifetime warranty guarantee. The kit is installed easily in about one hour per wheel. It is a direct replacement- no modifications are needed to install. After installation, the suspension warning light will turn off in about thirty minutes. The price is much more affordable than replacement at the dealership. Each kit includes easy to follow instructions with photos and helpful support information. Watch videos of our experts performing real life conversion installations on our exclusive YouTube channel. Ask our in-house technicians any questions you may have about your faulty Crown Victoria suspension. We are here to support your repair and help you get fixed up at an affordable price.
Is Your Suspension Failing?
How do I know if my 1992-2000 Ford Crown Victoria Air Suspension is failing?
If you have a bad suspension on the 1992-2000 Ford Crown Victoria, it will not be able to meet and maintain its proper ride height. The vehicle can be dangerous to take out on the road, so you’ll want it fixed immediately. There are some common signs you can use to identify a failed or leaking air suspension, so read on. The most common sign is a very noticeable and sudden uneven height difference between different sides of the Crown Victoria. Usually, the rear end sags while the front remains inflated. This looks like the Crown Victoria is “squatting” down lower than usual. Sometimes the body leans from the left to right or vice versa. If a suspension warning light is illuminated on the instrument cluster, the suspension is probably going bad. Other components will wear out, like the air suspension compressor. Check it. If it has ceased working or is running too often (noticeably noisy), then a suspension replacement or repair will be needed.
What kind of suspension does my 1992-2000 Ford Crown Victoria have?
1992-2000 Ford Crown Victoria Air Springs (x2) - commonly referred to as air bags, a plastic and rubber bag that is fitted on top of the strut that uses pressurized air as a cushion instead of a metal coil spring to hold a vehicle off of the ground and off of its wheels. These are the number one cause of all air suspension leaks. All air springs all go bad at about the same rate. If one is leaking, the others will not be far behind. For a proper repair, all of them need to be replaced at the same time.
1992-2000 Ford Crown Victoria Shock Absorbers (x4) - has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle.
1992-2000 Ford Crown Victoria Coil Springs (x2) - the front of the town car already has coil springs, that’s why we not only offer replacements for weakened coil springs in the front, but our conversion kit puts the same, sturdy design on the rear of the vehicle.
1992-2000 Ford Crown Victoria Height Sensors (x2) - a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out.
1992-2000 Ford Crown Victoria Air Lines- tubes that run from a compressor to the air which carry pressurized air to the air bags in order to adjust the height of the vehicle, respectively.
1992-2000 Ford Crown Victoria Solenoids (x2) - usually L-shaped, these plastic components connect the electrical connection and lines of suspension components to the suspension control module on vehicles with active suspension. The solenoid regulates the air pressure for each air spring. Solenoids start to leak as they wear out causing the vehicle to sag or to lean. This will cause the ride height sensor to send a signal to activate the compressor in an attempt to inflate the air suspension and level out the vehicle. This excessive work load will eventually lead to total failure of the compressor.
1992-2000 Ford Crown Victoria Compressor Assembly- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive.
1992-2000 Ford Crown Victoria Dryer- prevents moisture build-up inside of air suspension parts.
1992-2000 Ford Crown Victoria Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicle’s correct ride height.
1992-2000 Ford Crown Victoria O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.
How does this part compare to OEM parts and other competitive solutions?
Less Than Dealer
Reviews and Videos
Read what customers like you thought of our product.
There are currently no reviews for this product
Watch helpful installation and walkthrough videos.
Ready to Order
Don't wait another minute to get your vehicle running in top condition. Order now to save big!