Info and Resources
Learn everything you need to know about this product.
Learn more about what this product does and why you may need it.
Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...
2003-2006 Ford Expedition 2WD & 4WD Air Strut To Coil Over Strut Conversion With Lift Kit is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use standard shocks/struts and coil springs for less than the price of replacing one air strut.
Conversion Kit Features
- Saves Money
- All New Components
- Ride Great
- More Reliable Than Air Suspensions
- No Modifications Required To Install
- Easy To Install
- Premium Eibach Springs
Air Suspension Conversion Kit Includes
- 2 Rear Shocks
- 2 Rear Eibach Springs
- All Necessary Hardware
- Detailed Instructions
This Conversion Kit Fits
2003 Ford Crown Victoria, 2004 Ford Crown Victoria, 2005 Ford Crown Victoria, 2006 Ford Crown Victoria, 2007 Ford Crown Victoria, 2008 Ford Crown Victoria, 2009 Ford Crown Victoria, 2010 Ford Crown Victoria, 2011 Ford Crown Victoria, 2003 Lincoln Town Car, 2004 Lincoln Town Car, 2005 Lincoln Town Car, 2006 Lincoln Town Car, 2007 Lincoln Town Car, 2008 Lincoln Town Car, 2009 Lincoln Town Car, 2010 Lincoln Town Car, 2011 Lincoln Town Car, 2003 Mercury Grand Marquis, 2004 Mercury Grand Marquis, 2005 Mercury Grand Marquis, 2006 Mercury Grand Marquis, 2007 Mercury Grand Marquis, 2008 Mercury Grand Marquis, 2009 Mercury Grand Marquis , 2010 Mercury Grand Marquis, 2011 Mercury Grand Marquis
- If the Rear Shocks Are Worn Out, Then Usually, So Are The Front. For An Even Smoother Ride, Call 866-597-2397 For A Special Price
How Does Strutmasters Measure Up?
After Market Replacement Parts:
+ Air Springs ($499/spring)
+ Compressor and Dryer Assembly ($210)
+ Air Shocks ($95/shock)
= TOTAL: Over $2,500 (and that doesnât even include replacing electronic components that are known to fail such as the height sensors).
Strutmasters Conversion Kit:
+ 2 x Rear Shocks
+ 2 x Rear Eibach Springs
+ Detailed Installation Instructions
+ Over-the-phone technical support and a Limited Lifetime Warranty =
- Our Price: $179.00!
Learn why Strutmasters is the best choice for your new kit.
Why Choose Strutmasters?
Why choose the Conversion Kit over replacing the air suspension system on your 2003-2011 Ford Crown Victoria?
The majority of our customers tell us the low price of our non-air suspension conversion kits is what sealed the deal and made them switch from air suspension for good. We are, after all, The Suspension Experts. We know our stuff, and we know about every component that makes up the air suspension system on the Ford Crown Victoria. This conversion kit eliminates the need for all the complicated electrical parts to work together in unison. It includes two premium rear Eibach springs and two premium rear shocks. The suspension conversion is more affordable and reliable than the original OEM equipment. The kit is high quality and backed by our lifetime limited warranty. It is installed simply, in about one hour per wheel. It is a direct replacement- no modification is needed for the kit to be installed. After about thirty minutes, the suspension warning light will turn off. The kit is a DIYerâs dream- each one is accompanied by a completely easy to follow instruction guide, including pictures and helpful support information. Check out the exclusive videos on our YouTube channel of experts performing real suspension conversions. Lastly, ask our in-house technicians any questions you may have regarding your failed Ford Crown Victoria air suspension repair.
Is Your Suspension Failing?
How do I know if my 2003-2011 Ford Crown Victoria Air Suspension is failing?
You will want to know the signs of a failed or leaking air suspension in your 2003-2011 Ford Crown Victoria so that you can properly diagnose the problem before it is too late. There are a few distinctive things you want to look for that can help you tell if it is going bad or if it is already a suspension total failure. The clearest sign of suspension failure is a suddenly noticeable difference between the height of the rear end and the front end of the Crown Victoria. Usually, the rear will sag first while the front will remain inflated. This gives the illusion that the Crown Vic is squatting down in the rear end, too low to the ground. Look at the instrument panel, too. If there is a suspension warning light or message illuminated, then you probably need a suspension repair. Check on the air suspension compressor. If it is running too long (longer than 15-20 seconds) or has stopped working, you definitely want to research your replacement options. Check the rear air springs for visible cracks caused by dry rot.
What kind of suspension does my 2003-2011 Ford Crown Victoria have?
The 2003-2011 Ford Crown Victoria is built with the following suspension components:
2003-2011 Ford Crown Victoria Air Springs (x2)- commonly referred to as air bags, a plastic and rubber bag that is fitted on top of the strut that uses pressurized air as a cushion instead of a metal coil spring to hold a vehicle off of the ground and off of its wheels. These are the number one cause of all air suspension leaks. All air springs all go bad at about the same rate. If one is leaking, the others will not be far behind. For a proper repair, all of them need to be replaced at the same time.
2003-2011 Ford Crown Victoria Rear Gas Shocks (x2)- This vehicle is equipped with 2 rear gas shocks. These shocks are what absorb the impact of the rear tires hitting the road and make the vehicle ride smoothly.
2003-2011 Ford Crown Victoria Solenoids (x4)- This vehicle is equipped with 4 solenoids. These plastic components connect the electrical connection and lines of suspension components to the suspension control module. The solenoids are responsible for regulating the air pressure in each air spring or air shock. Solenoids are a small piece of the suspension system but they play a big role in how well it functions. If a solenoid is not working properly, it will cause the vehicle to be unlevel and, in turn, cause the compressor to burn out.
2003-2011 Ford Crown Victoria Compressor- This vehicle is equipped with one air suspension compressor. The compressor is responsible for pumping up the air springs and shocks. When the air suspension starts leaking, the compressor is forced to run continuously to try and keep the air springs inflated. After a couple of days of running non-stop, the compressor will burn itself out. Replacing the compressor is a timely and expensive project to undertake.
2003-2011 Ford Crown Victoria Dryer Assembly- This vehicle is equipped with a dryer assembly. The dryer assembly is responsible for getting moisture out of the air lines. Once the air suspension parts start to leak, moisture will build up throughout the air system. Moisture damages the air suspension components from the inside out. The dryer must be replaced whenever the compressor is replaced to prevent further damage.
2003-2011 Ford Crown Victoria Suspension Control Module- This vehicle is equipped with a suspension control module. This module is the brain of the suspension system and it reads all of the signals that are being sent by the height sensors and determines if the vehicle needs to be raised or lowered.
2003-2011 Ford Crown Victoria O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.
How does this part compare to OEM parts and other competitive solutions?
Less Than Dealer
Reviews and Videos
Read what customers like you thought of our product.
Watch helpful installation and walkthrough videos.
Ready to Order
Don't wait another minute to get your vehicle running in top condition. Order now to save big!