Select Your Vehicle

This product has multiple variations that are ideal solutions for different vehicles. Please select your vehicle below to select the best part for you.

Choose the Perfect Part

Additional Information

What kind of suspension does my 1994-1999 Cadillac Deville have?

The 1994-1999 Cadillac Deville is built with the following suspension components:

1994-1999 Cadillac Deville Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The Cadillac Deville’s struts, while having coil-springs, use an electronic signal to stiffen or soften the dampening of the strut.

1994-1999 Cadillac Deville Shock Absorbers (x2)- a metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle shock absorbers.

1994-1999 Cadillac Deville Coil Springs (x2)- Coil springs hold the vehicle up but be careful, they are rated for and designed to work with the rest of the suspension system, so when you change air shocks to passive shocks, then you will need a different rated coil spring that works well with the new type of shocks.

1994-1999 Cadillac Deville Air Lines- tubes that run from a compressor (air suspension) to the air struts which carry pressurized air to the air bags components in order to adjust the height of the vehicle, respectively.

1994-1999 Cadillac Deville Solenoids (x4)- usually L-shaped, these plastic components connect the electrical connection and lines of suspension components to the suspension control module on vehicles with active suspension. The solenoid regulates the air pressure for each air spring. Solenoids start to leak as they wear out causing the vehicle to sag or to lean. This will cause the ride height sensor to send a signal to activate the compressor in an attempt to inflate the air suspension and level out the vehicle. This excessive work load will eventually lead to total failure of the compressor.

1994-1999 Cadillac Deville Compressor- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive.

1994-1999 Cadillac Deville Dryer Assembly- used to keep moisture out of air lines and air springs in order to prevent freezing and internal cracking of these parts. Once air suspension starts leaking, moisture will build-up throughout the air system. Moisture damages the air suspension from the inside. The dryer will need to be replaced in order to eliminate the moisture and prevent any further damage.

1994-1999 Cadillac Deville Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicle’s correct ride height.

1994-1999 Cadillac Deville O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.

How Do I Know If My 1994-1999 Cadillac Deville Air Suspension Is Failing?

The most common symptom of a leaking or failed air suspension is a sudden noticeable uneven height difference between different sides of the vehicle. The vehicle could have a sagging rear end or front end, it could lean to the left side or right side, or the entire vehicle could be squatting down lower than normal. Other symptoms could include a suspension warning message or light in the instrument cluster, or the air compressor no longer working or running way too often (which would be very noisy and noticeable). The last major tip is your vehicle is no longer able to reach or maintain the proper ride height.

Why choose the Conversion Kit over replacing the air suspension system on your 1994-1999 Cadillac Deville?

We have already seen the assortment of components that make up the air suspension system on these vehicles. Our conversion kit eliminates having to depend on all of those parts functioning correctly and in sync. This kit consists of (2) rear coil-over shocks and all necessary hardware. It usually takes 1 hour per wheel for installation, and it is designed for DIYers! The conversion kit not only saves you time and frustration, it saves you lots of money.

1994-1999 Cadillac Deville Dealer Replacement Parts:

+ Coil Spring ($245/coil spring)

+ Shock Absorber ($179/shock absorber)
= TOTAL: Over $850 (and that doesn’t even include replacing electronic components that are known to fail such as the height sensors).

Our 1994-1999 Cadillac Deville Conversion Kit:

+ 2 x Rear Coil Over Shocks

+ All Necessary Hardware

+ Detailed Installation Instructions Including How To Disable The Suspension Warning Light

+ Over-The-Phone Technical Support And A Limited Lifetime Warranty = Only $289 (plus s&h).

5 Great Reasons To Act Now

  • Conversion Kits Save You Money
  • Limited Lifetime Warranty
  • Quick And Easy Installation
  • Made In The USA
  • Frustration Eliminated Forever!

What Are You Waiting For

For questions or to order over the phone, call:

(866) 597-2397

What kind of suspension does my 1993-1998 Cadillac Eldorado have?

The 1993-1998 Cadillac Eldorado is built with the following suspension components:

1993-1998 Cadillac Eldorado Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The Cadillac Deville’s struts, while having coil-springs, use an electronic signal to stiffen or soften the dampening of the strut.

1993-1998 Cadillac Eldorado Shock Absorbers (x2)- a metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle shock absorbers.

1993-1998 Cadillac Eldorado Coil Springs (x2)- Coil springs hold the vehicle up but be careful, they are rated for and designed to work with the rest of the suspension system, so when you change air shocks to passive shocks, then you will need a different rated coil spring that works well with the new type of shocks.

1993-1998 Cadillac Eldorado Air Lines- tubes that run from a compressor (air suspension) to the air struts which carry pressurized air to the air bags components in order to adjust the height of the vehicle, respectively.

1993-1998 Cadillac Eldorado Solenoids (x4)- usually L-shaped, these plastic components connect the electrical connection and lines of suspension components to the suspension control module on vehicles with active suspension. The solenoid regulates the air pressure for each air spring. Solenoids start to leak as they wear out causing the vehicle to sag or to lean. This will cause the ride height sensor to send a signal to activate the compressor in an attempt to inflate the air suspension and level out the vehicle. This excessive work load will eventually lead to total failure of the compressor.

1993-1998 Cadillac Eldorado Compressor- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive.

1993-1998 Cadillac Eldorado Dryer Assembly- used to keep moisture out of air lines and air springs in order to prevent freezing and internal cracking of these parts. Once air suspension starts leaking, moisture will build-up throughout the air system. Moisture damages the air suspension from the inside. The dryer will need to be replaced in order to eliminate the moisture and prevent any further damage.

1993-1998 Cadillac Eldorado Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicle’s correct ride height.

1993-1998 Cadillac Eldorado O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.

How Do I Know If My 1993-1998 Cadillac Eldorado Air Suspension Is Failing?

The most common symptom of a leaking or failed air suspension is a sudden noticeable uneven height difference between different sides of the vehicle. The vehicle could have a sagging rear end or front end, it could lean to the left side or right side, or the entire vehicle could be squatting down lower than normal. Other symptoms could include a suspension warning message or light in the instrument cluster, or the air compressor no longer working or running way too often (which would be very noisy and noticeable). The last major tip is your vehicle is no longer able to reach or maintain the proper ride height.

Why choose the Conversion Kit over replacing the air suspension system on your 1993-1998 Cadillac Eldorado?

We have already seen the assortment of components that make up the air suspension system on these vehicles. Our conversion kit eliminates having to depend on all of those parts functioning correctly and in sync. This kit consists of (2) rear coil-over shocks and all necessary hardware. It usually takes 1 hour per wheel for installation, and it is designed for DIYers! The conversion kit not only saves you time and frustration, it saves you lots of money.

1993-1998 Cadillac Eldorado Dealer Replacement Parts:

+ Coil Spring ($245/coil spring)

+ Shock Absorber ($179/shock absorber)
= TOTAL: Over $850 (and that doesn’t even include replacing electronic components that are known to fail such as the height sensors).

Our 1993-1998 Cadillac Eldorado Conversion Kit:

+ 2 x Rear Coil Over Shocks

+ All Necessary Hardware

+ Detailed Installation Instructions Including How To Disable The Suspension Warning Light

+ Over-The-Phone Technical Support And A Limited Lifetime Warranty = Only $289 (plus s&h).

5 Great Reasons To Act Now

  • Conversion Kits Save You Money
  • Limited Lifetime Warranty
  • Quick And Easy Installation
  • Made In The USA
  • Frustration Eliminated Forever!

What Are You Waiting For

For questions or to order over the phone, call:

(866) 597-2397

What kind of suspension does my 1993-1997 Cadillac Seville have?

The 1993-1997 Cadillac Seville is built with the following suspension components:

1993-1997 Cadillac Seville Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The Cadillac Deville’s struts, while having coil-springs, use an electronic signal to stiffen or soften the dampening of the strut.

1993-1997 Cadillac Seville Shock Absorbers (x2)- a metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle shock absorbers.

1993-1997 Cadillac Seville Coil Springs (x2)- Coil springs hold the vehicle up but be careful, they are rated for and designed to work with the rest of the suspension system, so when you change air shocks to passive shocks, then you will need a different rated coil spring that works well with the new type of shocks.

1993-1997 Cadillac Seville Air Lines- tubes that run from a compressor (air suspension) to the air struts which carry pressurized air to the air bags components in order to adjust the height of the vehicle, respectively.

1993-1997 Cadillac Seville Solenoids (x4)- usually L-shaped, these plastic components connect the electrical connection and lines of suspension components to the suspension control module on vehicles with active suspension. The solenoid regulates the air pressure for each air spring. Solenoids start to leak as they wear out causing the vehicle to sag or to lean. This will cause the ride height sensor to send a signal to activate the compressor in an attempt to inflate the air suspension and level out the vehicle. This excessive work load will eventually lead to total failure of the compressor.

1993-1997 Cadillac Seville Compressor- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive.

1993-1997 Cadillac Seville Dryer Assembly- used to keep moisture out of air lines and air springs in order to prevent freezing and internal cracking of these parts. Once air suspension starts leaking, moisture will build-up throughout the air system. Moisture damages the air suspension from the inside. The dryer will need to be replaced in order to eliminate the moisture and prevent any further damage.

1993-1997 Cadillac Seville Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicle’s correct ride height.

1993-1997 Cadillac Seville O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.

How Do I Know If My 1993-1997 Cadillac Seville Air Suspension Is Failing?

The most common symptom of a leaking or failed air suspension is a sudden noticeable uneven height difference between different sides of the vehicle. The vehicle could have a sagging rear end or front end, it could lean to the left side or right side, or the entire vehicle could be squatting down lower than normal. Other symptoms could include a suspension warning message or light in the instrument cluster, or the air compressor no longer working or running way too often (which would be very noisy and noticeable). The last major tip is your vehicle is no longer able to reach or maintain the proper ride height.

Why choose the Conversion Kit over replacing the air suspension system on your 1993-1997 Cadillac Seville?

We have already seen the assortment of components that make up the air suspension system on these vehicles. Our conversion kit eliminates having to depend on all of those parts functioning correctly and in sync. This kit consists of (2) rear coil-over shocks and all necessary hardware. It usually takes 1 hour per wheel for installation, and it is designed for DIYers! The conversion kit not only saves you time and frustration, it saves you lots of money.

1993-1997 Cadillac Seville Dealer Replacement Parts:

+ Coil Spring ($245/coil spring)

+ Shock Absorber ($179/shock absorber)
= TOTAL: Over $850 (and that doesn’t even include replacing electronic components that are known to fail such as the height sensors).

Our 1993-1997 Cadillac Seville Conversion Kit:

+ 2 x Rear Coil Over Shocks

+ All Necessary Hardware

+ Detailed Installation Instructions Including How To Disable The Suspension Warning Light

+ Over-The-Phone Technical Support And A Limited Lifetime Warranty = Only $289 (plus s&h).

5 Great Reasons To Act Now

  • Conversion Kits Save You Money
  • Limited Lifetime Warranty
  • Quick And Easy Installation
  • Made In The USA
  • Frustration Eliminated Forever!

What Are You Waiting For

For questions or to order over the phone, call:

(866) 597-2397