SKU: CADF1

Special Price: Price Varies

Year: 1985-1990
Make: GM (Buick, Cadillac, Oldsmobile, Pontiac)
Model: 85-90 Buick Electra, 86-90 Buick LeSabre, 85-90 Cadillac Deville, 85-90 Cadillac Fleetwood, 85-90 Oldsmobile Delta 88, 85-90 Oldsmobile Ninety-Eight (98), 87-90 Pontiac Bonneville
Manufacturer: Strutmasters
Product Type: Front Conversion Kit

Speak to a
Suspension Expert

Call 866-597-2397

Additional Information

What kind of suspension does my 1985-1990 Buick Electra have?

The 1985-1990 Buick Electra is built with the following front suspension components:

1985-1990 Buick Electra Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The Buick Electra’s struts use an electronic signal to stiffen or soften the dampening of the strut.

1985-1990 Buick Electra Height Sensors (x2) - a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out.

1985-1990 Buick Electra Suspension Control Module- a computer which is responsible for the operations of the electronic suspension system and maintaining the vehicle’s correct ride height.

How Do I Know If My Electronic Suspension Is Failing?

The most common symptom of a leaking or failed electronic suspension is a sudden noticeable change of dampening. The vehicle, in this case would become more bouncy, or have more of a “rough” feel, especially when going over small bumps in the road. Another symptom could include a suspension warning message or light in the instrument cluster.

Why choose the Conversion Kit over replacing the electronic suspension system on your 1985-1990 Buick Electra?

We have already seen the assortment of parts that construct the electronic suspension system. Our conversion kit gets rid of having to depend on all of those parts functioning correctly and in sync. This conversion kit consists of (2) completely pre-assembled coil-over struts that are as simple as a few bolts per strut for installation. Our suspension conversions are much more affordable and more reliable than the original parts and it comes with Strutmasters “Limited Life-Time Warranty”. The installation is easy and no modifications are required. Installs usually take about an hour per wheel and about 30 minutes to turn off the suspension warning light on the instrument cluster. Strutmasters kits include a complete set of easy to follow installation instructions with pictures & other helpful information. Also, you can find the videos of us performing actual installations on our YouTube channel. As if that isn’t enough, Strutmasters also has in-house technicians available to answer your questions Monday – Saturday.

1985-1990 Buick Electra OEM Replacement Parts:

+ UNAVAILABLE!

1985-1990 Buick Electra Aftermarket Replacement Parts:

+ HARD TO FIND!

Our 1985-1990 Buick Electra Conversion Kit:

+ (2) completely pre-assembled coil-over struts
+ Detailed installation instructions
+ Over-the-phone technical support
+ Limited Lifetime Warranty
= Only $329 (plus s&h).

Good luck finding original equipment for the front of this vehicle!

5 Great Reasons To Act Now

  • Conversion Kits Save You Money
  • Limited Lifetime Warranty
  • Quick And Easy Installation
  • Made In The USA
  • Frustration Eliminated Forever!

What Are You Waiting For

For questions or to order over the phone, call: (866) 597-2397 Monday - Saturday / 8AM - 8PM

What kind of suspension does my 1986-1990 Buick LeSabre have?

The 1986-1990 Buick LeSabre is built with the following front suspension components:

1985-1990 Buick LeSabre Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The Buick Electra’s struts use an electronic signal to stiffen or soften the dampening of the strut.

1986-1990 Buick LeSabre Height Sensors (x2) - a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out.

1986-1990 Buick LeSabre Suspension Control Module- a computer which is responsible for the operations of the electronic suspension system and maintaining the vehicle’s correct ride height.

How Do I Know If My Electronic Suspension Is Failing?

The most common symptom of a leaking or failed electronic suspension is a sudden noticeable change of dampening. The vehicle, in this case would become more bouncy, or have more of a “rough” feel, especially when going over small bumps in the road. Another symptom could include a suspension warning message or light in the instrument cluster.

Why choose the Conversion Kit over replacing the electronic suspension system on your 1986-1990 Buick LeSabre?

We have already seen the assortment of parts that construct the electronic suspension system. Our conversion kit gets rid of having to depend on all of those parts functioning correctly and in sync. This conversion kit consists of (2) completely pre-assembled coil-over struts that are as simple as a few bolts per strut for installation. It normally only takes about an hour per wheel for installation, and is designed for DIYers! The conversion not only saves you time and frustration, it saves you lots of money. Now let’s take a look at the cost difference between choosing an electronic vs. a non-electronic suspension system. Here, we are going to compare three prices: the price for repairing your electronic suspension system at the dealer, the price for installing aftermarket electronic suspension parts on your vehicle, and the price of getting rid of the faulty electronic ride heartache and installing a brand new coil-over suspension conversion kit:

1986-1990 Buick LeSabre OEM Replacement Parts:

+ UNAVAILABLE!

1986-1990 Buick LeSabre Aftermarket Replacement Parts:

+ HARD TO FIND!

Our 1986-1990 Buick LeSabre Conversion Kit:

+ (2) completely pre-assembled coil-over struts
+ Detailed installation instructions
+ Over-the-phone technical support
+ Limited Lifetime Warranty
= Only $329 (plus s&h).

Good luck finding original equipment for the front of this vehicle!

5 Great Reasons To Act Now

  • Conversion Kits Save You Money
  • Limited Lifetime Warranty
  • Quick And Easy Installation
  • Made In The USA
  • Frustration Eliminated Forever!

What Are You Waiting For

For questions or to order over the phone, call: (866) 597-2397 Monday - Saturday / 8AM - 8PM

What kind of suspension does my 1985-1990 Cadillac Deville have?

The 1985-1990 Cadillac Deville is built with the following front suspension components:

1985-1990 Cadillac Deville Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The Buick Electra’s struts use an electronic signal to stiffen or soften the dampening of the strut.

1985-1990 Cadillac Deville Height Sensors (x2) - a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out.

1985-1990 Cadillac Deville Suspension Control Module- a computer which is responsible for the operations of the electronic suspension system and maintaining the vehicle’s correct ride height.

How Do I Know If My Electronic Suspension Is Failing?

The most common symptom of a leaking or failed electronic suspension is a sudden noticeable change of dampening. The vehicle, in this case would become more bouncy, or have more of a “rough” feel, especially when going over small bumps in the road. Another symptom could include a suspension warning message or light in the instrument cluster.

Why choose the Conversion Kit over replacing the electronic suspension system on your 1985-1990 Cadillac Deville?

We have already seen the assortment of parts that construct the electronic suspension system. Our conversion kit gets rid of having to depend on all of those parts functioning correctly and in sync. This conversion kit consists of (2) completely pre-assembled coil-over struts that are as simple as a few bolts per strut for installation. Our suspension conversions are much more affordable and more reliable than the original parts and it comes with Strutmasters “Limited Life-Time Warranty”. The installation is easy and no modifications are required. Installs usually take about an hour per wheel and about 30 minutes to turn off the suspension warning light on the instrument cluster. Strutmasters kits include a complete set of easy to follow installation instructions with pictures & other helpful information. Also, you can find the videos of us performing actual installations on our YouTube channel. As if that isn’t enough, Strutmasters also has in-house technicians available to answer your questions Monday – Saturday.

1985-1990 Cadillac Deville OEM Replacement Parts:

+ UNAVAILABLE!

1985-1990 Cadillac Deville Aftermarket Replacement Parts:

+ HARD TO FIND!

Our 1985-1990 Cadillac Deville Conversion Kit:

+ (2) completely pre-assembled coil-over struts
+ Detailed installation instructions
+ Over-the-phone technical support
+ Limited Lifetime Warranty
= Only $329 (plus s&h).

Good luck finding original equipment for the front of this vehicle!

5 Great Reasons To Act Now

  • Conversion Kits Save You Money
  • Limited Lifetime Warranty
  • Quick And Easy Installation
  • Made In The USA
  • Frustration Eliminated Forever!

What Are You Waiting For

For questions or to order over the phone, call: (866) 597-2397 Monday - Saturday / 8AM - 8PM

What kind of suspension does my 1985-1990 Cadillac Fleetwood have?

The 1985-1990 Cadillac Fleetwood is built with the following front suspension components:

1985-1990 Cadillac Fleetwood Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The Buick Electra’s struts use an electronic signal to stiffen or soften the dampening of the strut.

1985-1990 Cadillac Fleetwood Height Sensors (x2) - a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out.

1985-1990 Cadillac Fleetwood Suspension Control Module- a computer which is responsible for the operations of the electronic suspension system and maintaining the vehicle’s correct ride height.

How Do I Know If My Electronic Suspension Is Failing?

The most common symptom of a leaking or failed electronic suspension is a sudden noticeable change of dampening. The vehicle, in this case would become more bouncy, or have more of a “rough” feel, especially when going over small bumps in the road. Another symptom could include a suspension warning message or light in the instrument cluster.

Why choose the Conversion Kit over replacing the electronic suspension system on your 1985-1990 Cadillac Fleetwood?

We have already seen the assortment of parts that construct the electronic suspension system. Our conversion kit gets rid of having to depend on all of those parts functioning correctly and in sync. This conversion kit consists of (2) completely pre-assembled coil-over struts that are as simple as a few bolts per strut for installation. Our suspension conversions are much more affordable and more reliable than the original parts and it comes with Strutmasters “Limited Life-Time Warranty”. The installation is easy and no modifications are required. Installs usually take about an hour per wheel and about 30 minutes to turn off the suspension warning light on the instrument cluster. Strutmasters kits include a complete set of easy to follow installation instructions with pictures & other helpful information. Also, you can find the videos of us performing actual installations on our YouTube channel. As if that isn’t enough, Strutmasters also has in-house technicians available to answer your questions Monday – Saturday.

1985-1990 Cadillac Fleetwood OEM Replacement Parts:

+ UNAVAILABLE!

1985-1990 Cadillac Fleetwood Aftermarket Replacement Parts:

+ HARD TO FIND!

Our 1985-1990 Cadillac Fleetwood Conversion Kit:

+ (2) completely pre-assembled coil-over struts
+ Detailed installation instructions
+ Over-the-phone technical support
+ Limited Lifetime Warranty
= Only $329 (plus s&h).

Good luck finding original equipment for the front of this vehicle!

5 Great Reasons To Act Now

  • Conversion Kits Save You Money
  • Limited Lifetime Warranty
  • Quick And Easy Installation
  • Made In The USA
  • Frustration Eliminated Forever!

What Are You Waiting For

For questions or to order over the phone, call: (866) 597-2397 Monday - Saturday / 8AM - 8PM

What kind of suspension does my 1985-1990 Oldsmobile Delta 88 have?

The 1985-1990 Oldsmobile Delta 88 is built with the following front suspension components:

1985-1990 Oldsmobile Delta 88 Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The Buick Electra’s struts use an electronic signal to stiffen or soften the dampening of the strut.

1985-1990 Oldsmobile Delta 88 Height Sensors (x2) - a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out.

1985-1990 Oldsmobile Delta 88 Suspension Control Module- a computer which is responsible for the operations of the electronic suspension system and maintaining the vehicle’s correct ride height.

How Do I Know If My Electronic Suspension Is Failing?

The most common symptom of a leaking or failed electronic suspension is a sudden noticeable change of dampening. The vehicle, in this case would become more bouncy, or have more of a “rough” feel, especially when going over small bumps in the road. Another symptom could include a suspension warning message or light in the instrument cluster.

Why choose the Conversion Kit over replacing the electronic suspension system on your 1985-1990 Oldsmobile Delta 88?

We have already seen the assortment of parts that construct the electronic suspension system. Our conversion kit gets rid of having to depend on all of those parts functioning correctly and in sync. This conversion kit consists of (2) completely pre-assembled coil-over struts that are as simple as a few bolts per strut for installation. Our suspension conversions are much more affordable and more reliable than the original parts and it comes with Strutmasters “Limited Life-Time Warranty”. The installation is easy and no modifications are required. Installs usually take about an hour per wheel and about 30 minutes to turn off the suspension warning light on the instrument cluster. Strutmasters kits include a complete set of easy to follow installation instructions with pictures & other helpful information. Also, you can find the videos of us performing actual installations on our YouTube channel. As if that isn’t enough, Strutmasters also has in-house technicians available to answer your questions Monday – Saturday.

1985-1990 Oldsmobile Delta 88 OEM Replacement Parts:

+ UNAVAILABLE!

1985-1990 Oldsmobile Delta 88 Aftermarket Replacement Parts:

+ HARD TO FIND!

Our 1985-1990 Oldsmobile Delta 88 Conversion Kit:

+ (2) completely pre-assembled coil-over struts
+ Detailed installation instructions
+ Over-the-phone technical support
+ Limited Lifetime Warranty
= Only $329 (plus s&h).

Good luck finding original equipment for the front of this vehicle!

5 Great Reasons To Act Now

  • Conversion Kits Save You Money
  • Limited Lifetime Warranty
  • Quick And Easy Installation
  • Made In The USA
  • Frustration Eliminated Forever!

What Are You Waiting For

For questions or to order over the phone, call: (866) 597-2397 Monday - Saturday / 8AM - 8PM

What kind of suspension does my 1985-1990 Oldsmobile Ninety-Eight have?

The 1985-1990 Oldsmobile Ninety-Eight is built with the following front suspension components:

1985-1990 Oldsmobile Ninety-Eight Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The Buick Electra’s struts use an electronic signal to stiffen or soften the dampening of the strut.

1985-1990 Oldsmobile Ninety-Eight Height Sensors (x2) - a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out.

1985-1990 Oldsmobile Ninety-Eight Suspension Control Module- a computer which is responsible for the operations of the electronic suspension system and maintaining the vehicle’s correct ride height.

How Do I Know If My Electronic Suspension Is Failing?

The most common symptom of a leaking or failed electronic suspension is a sudden noticeable change of dampening. The vehicle, in this case would become more bouncy, or have more of a “rough” feel, especially when going over small bumps in the road. Another symptom could include a suspension warning message or light in the instrument cluster.

Why choose the Conversion Kit over replacing the electronic suspension system on your 1985-1990 Oldsmobile Ninety-Eight?

We have already seen the assortment of parts that construct the electronic suspension system. Our conversion kit gets rid of having to depend on all of those parts functioning correctly and in sync. This conversion kit consists of (2) completely pre-assembled coil-over struts that are as simple as a few bolts per strut for installation. Our suspension conversions are much more affordable and more reliable than the original parts and it comes with Strutmasters “Limited Life-Time Warranty”. The installation is easy and no modifications are required. Installs usually take about an hour per wheel and about 30 minutes to turn off the suspension warning light on the instrument cluster. Strutmasters kits include a complete set of easy to follow installation instructions with pictures & other helpful information. Also, you can find the videos of us performing actual installations on our YouTube channel. As if that isn’t enough, Strutmasters also has in-house technicians available to answer your questions Monday – Saturday.

1985-1990 Oldsmobile Ninety-Eight OEM Replacement Parts:

+ UNAVAILABLE!

1985-1990 Oldsmobile Ninety-Eight Aftermarket Replacement Parts:

+ HARD TO FIND!

Our 1985-1990 Oldsmobile Ninety-Eight Conversion Kit:

+ (2) completely pre-assembled coil-over struts
+ Detailed installation instructions
+ Over-the-phone technical support
+ Limited Lifetime Warranty
= Only $329 (plus s&h).

Good luck finding original equipment for the front of this vehicle!

5 Great Reasons To Act Now

  • Conversion Kits Save You Money
  • Limited Lifetime Warranty
  • Quick And Easy Installation
  • Made In The USA
  • Frustration Eliminated Forever!

What Are You Waiting For

For questions or to order over the phone, call: (866) 597-2397 Monday - Saturday / 8AM - 8PM

What kind of suspension does my 1987-1990 Pontiac Bonneville have?

The 1987-1990 Pontiac Bonneville is built with the following front suspension components:

1987-1990 Pontiac Bonneville Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The Buick Electra’s struts use an electronic signal to stiffen or soften the dampening of the strut.

1987-1990 Pontiac Bonneville Height Sensors (x2) - a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out.

1987-1990 Pontiac Bonneville Suspension Control Module- a computer which is responsible for the operations of the electronic suspension system and maintaining the vehicle’s correct ride height.

How Do I Know If My Electronic Suspension Is Failing?

The most common symptom of a leaking or failed electronic suspension is a sudden noticeable change of dampening. The vehicle, in this case would become more bouncy, or have more of a “rough” feel, especially when going over small bumps in the road. Another symptom could include a suspension warning message or light in the instrument cluster.

Why choose the Conversion Kit over replacing the electronic suspension system on your 1987-1990 Pontiac Bonneville?

We have already seen the assortment of parts that construct the electronic suspension system. Our conversion kit gets rid of having to depend on all of those parts functioning correctly and in sync. This conversion kit consists of (2) completely pre-assembled coil-over struts that are as simple as a few bolts per strut for installation. Our suspension conversions are much more affordable and more reliable than the original parts and it comes with Strutmasters “Limited Life-Time Warranty”. The installation is easy and no modifications are required. Installs usually take about an hour per wheel and about 30 minutes to turn off the suspension warning light on the instrument cluster. Strutmasters kits include a complete set of easy to follow installation instructions with pictures & other helpful information. Also, you can find the videos of us performing actual installations on our YouTube channel. As if that isn’t enough, Strutmasters also has in-house technicians available to answer your questions Monday – Saturday.

1987-1990 Pontiac Bonneville OEM Replacement Parts:

+ UNAVAILABLE!

1987-1990 Pontiac Bonneville Aftermarket Replacement Parts:

+ HARD TO FIND!

Our 1987-1990 Pontiac Bonneville Conversion Kit:

+ (2) completely pre-assembled coil-over struts
+ Detailed installation instructions
+ Over-the-phone technical support
+ Limited Lifetime Warranty
= Only $329 (plus s&h).

Good luck finding original equipment for the front of this vehicle!

5 Great Reasons To Act Now

  • Conversion Kits Save You Money
  • Limited Lifetime Warranty
  • Quick And Easy Installation
  • Made In The USA
  • Frustration Eliminated Forever!

What Are You Waiting For

For questions or to order over the phone, call: (866) 597-2397 Monday - Saturday / 8AM - 8PM