2002-2006 Cadillac Escalade, Escalade ESV, EXT 4-Wheel Air Suspension Conversion/Delete Kit (GC14F)

Convert Your Active Air and Electronic Suspension To A Passive Suspension. End Your Air Suspension Problems Forever...

This Strutmasters 2000-2006 Cadillac Escalade ESV & EXT 4 Wheel Air Suspension Conversion Kit will bring an end to your air suspension troubles for good. For less than the cost of replacing just one of your Escalade's air struts you can convert your entire suspension to brand new coils. Not to mention, all of our kits include step-by-step instructions to ensure an easy installation process.

Conversion Kit Features

• Saves Money
• All New Components
• Improved Ride Quality
• More Reliable Than Air Suspensions
• No Modifications Required To Install
• Easy To Install
• Premium Springs

Air Suspension Conversion Kit Includes

• 2 Passive Front Shocks
• 2 Rear Springs
• 2 Passive, Premium Rear Shocks
• Electronic Components To Eliminate the Suspension Warning Light
• All Necessary Hardware
• Step-By-Step Detailed Installation Instructions

This Conversion Kit Fits

2002 Cadillac Escalade, 2003 Cadillac Escalade, 2004 Cadillac Escalade, 2005 Cadillac Escalade, 2006 Cadillac Escalade

Product Notes

• Fits Both 2WD and 4WD Models.
• Fits Both EXT and ESV Models.
• For best results in resolving the suspension warning light, we recommend converting all four wheels of the vehicle at the same time.

Replaced Components

The 2002-2006 Cadillac Escalade, Escalade ESV & EXT is built with the following suspension components:

2002-2006 Cadillac Escalade, Escalade ESV & EXT Air/Magnetic Shocks (x2) - These electronically-controlled shocks use magnets or air bladders to smooth out the ride and help hold the vehicle up off of its wheels and the ground.

2002-2006 Cadillac Escalade, Escalade ESV & EXT 1500 Coil Springs (x2)- Your Escalade features coil springs which are designed to work with its original active suspension. Though they look similar to the coils in a passive suspension, they are not rated properly for a passive suspension and must be changed out for new ones if you wish to convert your vehicle.

2002-2006 Cadillac Escalade, Escalade ESV & EXT Torsion Bar - Located at the front of your Escalade, this adjustable horizontal bar holds its front end up off of the ground.

2002-2006 Cadillac Escalade, Escalade ESV & EXT Shock Absorbers (x2) - These metal cylinders are filled with a hydraulic fluid that helps it absorb the force of the wheels traveling over uneven road surfaces. They therefore control the comfort of the vehicle's ride and limit the wear and tear on the vehicle caused by this type of travel. T

2002-2006 Cadillac Escalade, Escalade ESV & EXT Air Lines - These plastic and rubber air lines carry the pressurized air which is generated by the compressor into the air springs. This allows the air springs to properly inflate and maintain the correct ride height.

2002-2006 Cadillac Escalade, Escalade ESV & EXT Solenoids (x4) - These plastic components unite the electrical and mechanical components of the suspension with the suspension control module. This allows them to regulate the air pressure in each air spring next to which they are located. They will start to leak as they age, putting an extra workload on the compressor and other components.

2002-2006 Cadillac Escalade, Escalade ESV & EXT Compressor - Your Escalade's air compressor is like all air compressors in that it uses mechanical force to generate pressurized air. It then pumps this air out through the air lines into the air springs. It is an expensive and difficult component to repair or replace, making it vital to identify problems with it as early as possible.

2002-2006 Cadillac Escalade, Escalade ESV & EXT Dryer Assembly - In order to avoid damage caused by moisture in the system, your Escalade employs a dryer assembly which keeps the system free of moisture. Most mechanics recommend replacing this assembly whenever the compressor is replaced.

2002-2006 Cadillac Escalade, Escalade ESV & EXT Suspension Control Module - Acting as the 'brain' of the system, the suspension control module interprets signals sent by the height sensors and determines how much each air spring needs to be raised or lowered. It also monitors the system and will illuminate the suspension warning light if there are any major issues.

2002-2006 Cadillac Escalade, Escalade ESV & EXT - The o-rings in your Cadillac's air suspension system maintain proper seals where the air lines connect. This keeps the system clean and running efficiently. It is advisable to replace these whenever the system is serviced.

Suspension Failure Signs

There are a few early warning signs to look for when you suspect you may be having suspension issues with your Escalade. If you hear your compressor running too loudly or too long during each cycle, this is an indication that there is a problem somewhere and your compressor is attempting to compensate.

The easiest visible sign to recognize is a noticeable loss of ride height from three to five inches in the rear of the vehicle. This can also be a height differential between the driver and passenger sides of your Cadillac. When the suspension issues become severe enough, the suspension warning light will illuminate on your dash panel. Detecting suspension problems early on is the only way to save yourself from safety hazards and crippling expenses caused by a bad suspension.

OEM Replacement Cost

• Front Electronic Shocks ($318/Front Shocks) +
• Rear Air Shocks ($396/Rear Shocks) +
• Coil Spring ($86/Coil Spring) +
• Compressor and Dryer Assembly ($270)
• = TOTAL: Over $1,638 (and that doesn't even include replacing electronic components that are known to fail such as the height sensors).