website
1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240)
1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240)
1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240)
1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240)
1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240)
1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240)
1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240)
1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240)
1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240)
1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240)

1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240)

The 1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240) is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use passive shocks and coil springs for less than the price of replacing one original equipment air spring.
$439.00 In Stock Sold out
Truck

IN STOCK & SHIPS FAST!

ribbon

FITMENT GUARANTEED

Need assistance buying the right part? Speak to an expert now.

Call Us (866) 597-2397

Monday - Friday: 8 AM - 9 PM
Saturday: 9 AM - 6 PM

This product is vehicle specific.
Select a vehicle to ensure fitment.
SELECT YOURVEHICLE
CHECK
COMPATIBILITY CHART
Land Rover
  • Description
  • Why Strutmasters
  • OEM Numbers
  • Reviews

Convert Your Air Suspension To A Coil Spring Suspension End Your Air Suspension Problems Forever...

Strutmasters 1995-2002 Range Rover P38a Chassis 4 Wheel Air Suspension Conversion Kit is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use standard shocks/struts and coil springs for less than the price of replacing one air strut.

FEATURES:

  • Saves Money
  • All New Components
  • Returns Vehicle to "Medium" Factory Suspension Setting
  • More Reliable Than Air Suspensions
  • No Modifications Required To Install
  • Easy To Install
  • Premium Springs
KIT INCLUDES:
  • 2 Front Springs
  • 2 Rear Springs
  • All Necessary Mounts
  • All Necessary Hardware
  • Detailed Instructions Including How To Disable The Suspension Warning Light
Product Notes:
  • Fits Range Rover P38a Chassis Only


Replaced Components

The 1995-2002 Range Rover P38A Chassis is built with the following suspension components:

1995-2002 Range Rover P38A Chassis Shock Absorbers (x4)- a metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle to reduce the effects of vertical travel on a rough surface which controls the bounciness and therefore, comfort, of a vehicle.

1995-2002 Range Rover P38A Chassis Air Struts (x4)- struts that contain an air bladder whose dampening capabilities are controlled by the suspension control module; these have two functions. They connect the wheel of a vehicle to the driving surface in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. They also help maintain the vehicles correct ride height, especially whenever the amount of load put onto the vehicle changes.

1995-2002 Range Rover P38A Chassis Height Sensors (x4)- a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part; like all moving parts, it will eventually wear out.

1995-2002 Range Rover P38A Chassis Air Lines- tubes that run from a compressor (air suspension) to the air struts, which carry pressurized air to the air bags components to adjust the height of the vehicle, respectively.

1995-2002 Range Rover P38A Chassis Solenoids (x4)- usually L-shaped, these plastic components connect the electrical connection and lines of suspension components to the suspension control module on vehicles with active suspension. The solenoid regulates the air pressure for each air spring. Solenoids start to leak as they wear out, causing the vehicle to sag or lean. This will cause the ride height sensor to send a signal to activate the compressor in an attempt to inflate the air suspension and level out the vehicle. This excessive work load will eventually lead to total failure of the compressor.

1995-2002 Range Rover P38A Chassis Compressor- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive.

1995-2002 Range Rover P38A Chassis Dryer Assembly- used to keep moisture out of air lines and air springs to prevent freezing and internal cracking of these parts. Once air suspension starts leaking, moisture will build up throughout the air system. Moisture damages the air suspension from the inside. The dryer will need to be replaced in order to eliminate the moisture and prevent any further damage.

1995-2002 Range Rover P38A Chassis Suspension Control Module- a computer that is responsible for the operations of the air suspension system and maintaining the vehicle's correct ride height.

1995-2002 Range Rover P38A Chassis O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.



Suspension Failure Signs
If the 1995-2002 Range Rover P38A Chassis is not maintaining the proper ride height, it may have a failed or leaking air suspension system. Early detection of a bad suspension is the key to avoiding total failure, so look for these classic signs before it's too late. A suddenly noticeable height imbalance between different sides of the vehicle is commonly seen. Typically there will be a sagging rear or front end with an inflated opposite end. There may be a shifting lean from one side to the other. The vehicle may have a “squatting down” appearance. Other signs to look for are a suspension warning light on the dashboard and an air compressor that runs too often or has ceased working altogether. The longer the P38A owner postpones a suspension repair, the more expensive it is.
The various components that make up the original air suspension system on the 1995-2002 Range Rover P38A Chassis must always work together. When one part breaks, the system is defunct. Strutmasters' air-to-non-air suspension conversion kit, manufactured in the USA, comes complete with two front springs, two rear springs, and all necessary mounts. Typically the kit is installed in as little as one hour per wheel; car enthusiasts love the ease with which it's installed! Detailed instructions and online installation videos help guide a smooth repair process. For further help, ASE-certified experts can provide tech support over the phone. Each kit comes with Strutmasters' 1-year warranty. Lastly, the kit's price is considerably less than the alternatives: direct dealership replacement and individual part replacement.
REB101740, ANR4684, RKB101460, REB101740, ANR4684, RKB101460, STC3672, STC3671
Have a Question? Call (866) 597-2397 to Speak to a Suspension Expert

1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240) - $439.00

ADD TO CART

1995-2002 Range Rover P38A Chassis 4 Wheel Air Suspension Conversion Kit (LB240)

$439.00 - ADD TO CART