IN STOCK & SHIPS FAST!
Monday - Friday: 8 AM - 9 PM
Saturday: 9 AM - 6 PM
- Why Strutmasters
- OEM Numbers
Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...Strutmasters 2007-2014 Chevrolet Suburban 1500 4-Wheel Air Suspension Conversion/Delete Kit is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use standard struts and coil springs for less than the price of replacing one electronic strut.
Conversion Kit Features
- Saves Money
- All New Components
- Improved Ride
- More Reliable Than Air Suspensions
- No Modifications Required To Install
- Easy To Install
- Premium Springs
Air Suspension Conversion Kit Includes
- 2 Pre-assembled Front Coilover Strut Assemblies
- 2 Rear Springs
- 2 Passive, Premium Rear Shocks
- All Necessary Hardware
- Detailed Instructions
This Conversion Kit Fits2007 Chevrolet Suburban 1500, 2008 Chevrolet Suburban 1500, 2009 Chevrolet Suburban 1500, 2010 Chevrolet Suburban 1500, 2011 Chevrolet Suburban 1500, 2012 Chevrolet Suburban 1500, 2013 Chevrolet Suburban 1500, 2014 Chevrolet Suburban 1500
- Given that you are replacing worn suspension components, your vehicle may sit higher after the conversion is complete.
- For the Z95 suspension package, this kit will level the front rake by approximately 2".
- IN ORDER TO REMOVE THE WARNING LIGHT FOR 2007 AND UP MODELS, YOU MUST INSTALL A 4 WHEEL KIT AND THE MODULE! 2014 MODEL YEAR DOES NOT REQUIRE A MODULE FOR THE WARNING LIGHT
- Fits Standard, ESV, and EXT Models.
- DOES NOT INCLUDE LIGHT FIX MODULE!
The 2007-2014 Chevrolet Suburban 1500 is built with the following suspension components:
2007-2014 Chevrolet Suburban 1500 Air/Magnetic Shocks (x2)- shocks that contain an air bladder or magnets whose dampening capabilities is controlled by the suspension control module.
2007-2014 Chevrolet Suburban 1500 Coil Springs (x4)- Coil springs hold the vehicle up but be careful, they are rated for and designed to work with the rest of the suspension system, so when you change air shocks to passive shocks, then you will need a different rated coil spring that works well with the new type of shocks.
2007-2014 Chevrolet Suburban 1500 Torsion Bar- Adjustable horizontal bar on the front of the vehicle that holds the vehicle off the ground torsion bar.
2007-2014 Chevrolet Suburban 1500 Shock Absorbers (x2)- a metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle.
2007-2014 Chevrolet Suburban 1500 Air Lines- tubes that run from a compressor (air suspension) to the air struts which carry pressurized air to the air bags components in order to adjust the height of the vehicle, respectively.
2007-2014 Chevrolet Suburban 1500 Solenoids (x4)- usually L-shaped, these plastic components connect the electrical connection and lines of suspension components to the suspension control module on vehicles with active suspension. The solenoid regulates the air pressure for each air spring. Solenoids start to leak as they wear out causing the vehicle to sag or to lean. This will cause the ride height sensor to send a signal to activate the compressor in an attempt to inflate the air suspension and level out the vehicle. This excessive work load will eventually lead to total failure of the compressor.
2007-2014 Chevrolet Suburban 1500 Compressor- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive.
2007-2014 Chevrolet Suburban 1500 Dryer Assembly- used to keep moisture out of air lines and air springs in order to prevent freezing and internal cracking of these parts. Once air suspension starts leaking, moisture will build-up throughout the air system. Moisture damages the air suspension from the inside. The dryer will need to be replaced in order to eliminate the moisture and prevent any further damage.
2007-2014 Chevrolet Suburban 1500 Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicle's correct ride height.
2007-2014 Chevrolet Suburban 1500 O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.
Suspension Failure Signs
If you suspect your Chevrolet Suburban 1500 is not reaching and maintaining its appropriate ride height, it may be suffering from a failed or leaking air suspension system. You want to diagnose it before it is too late. Once total failure sets in, all the other vehicle components will wear out. The most noticeable sign is a sudden uneven height difference between different sides of the Suburban 1500. Usually, there was a sagging on one end while the other end remains inflated (rear vs front). The Suburban 1500 may lean from one side to the other. Have you ever seen a car on the road that looks like it's squatting down in the rear end? Bingo- that's a bad suspension. If your air compressor has stopped working or is very loud and noisy, it may be running too often- another sign of a failed suspension. Lastly, look for an illuminated suspension warning light on the instrument panel. A repair or replacement may be necessary.
OEM Replacement Cost
- Struts ($329/Strut) +
- Rear Shocks ($396/Rear Shocks) +
- Coil Spring ($86/Coil Spring) +
- Compressor and Dryer Assembly ($270)
- = TOTAL: Over $1,320 (and that doesn't even include replacing electronic components that are known to fail such as the height sensors).