IN STOCK & SHIPS FAST!
1 YEAR WARRANTY - LIMITED LIFETIME ON ALL SPRINGS
Monday - Friday: 8 AM - 9 PM
Saturday: 9 AM - 6 PM
- Why Strutmasters
- OEM Numbers
Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...Strutmasters 1991-1999 Pontiac Bonneville 4 Wheel Air Suspension Conversion Kit is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use standard shocks/struts and coil springs for less than the price of replacing one air strut.
Conversion Kit Features
- Saves Money
- All New Components
- Returns Vehicle To Factory Ride Height
- Showroom New Ride Quality
- More Reliable Than Electronic Suspensions
- No Modifications Required To Install
- Easy To Install
Air Suspension Conversion Kit Includes
- 2 Pre-Assembled Complete Front Strut Assemblies Including Springs And Mounts
- 2 Premium Rear Shocks
- 2 Rear Springs
- All Necessary Hardware
- Detailed Instructions
This Conversion Kit Fits1991-1999 Pontiac Bonneville
- If the suspension warning light is currently on, call 866-597-2397 for more information prior to installation
The 1991-1999 Pontiac Bonneville is built with the following suspension components:
1991-1999 Pontiac Bonneville Electronic Struts (x2)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. The Buick LeSabres struts, while having coil-springs, use an electronic signal to stiffen or soften the dampening of the strut.
1991-1999 Pontiac Bonneville Height Sensors (x2)- a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out. .
1991-1999 Pontiac Bonneville Air Lines- tubes that run from a compressor (air suspension) to the air struts which carry pressurized air to the air bags components in order to adjust the height of the vehicle, respectively.
1991-1999 Pontiac Bonneville Solenoids (x4)- usually L-shaped, these plastic components connect the electrical connection and lines of suspension components to the suspension control module on vehicles with active suspension. The solenoid regulates the air pressure for each air spring. Solenoids start to leak as they wear out causing the vehicle to sag or to lean. This will cause the ride height sensor to send a signal to activate the compressor in an attempt to inflate the air suspension and level out the vehicle. This excessive work load will eventually lead to total failure of the compressor.
1991-1999 Pontiac Bonneville Compressor- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive.
1991-1999 Pontiac Bonneville Dryer Assembly- used to keep moisture out of air lines and air springs in order to prevent freezing and internal cracking of these parts. Once air suspension starts leaking, moisture will build-up throughout the air system. Moisture damages the air suspension from the inside. The dryer will need to be replaced in order to eliminate the moisture and prevent any further damage.
1991-1999 Pontiac Bonneville Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicles correct ride height.
1991-1999 Pontiac Bonneville O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.
Suspension Failure Signs
If your 91-99 Pontiac Bonneville is not reaching and maintaining its proper ride height, it may be time to look for common signs of a failed or leaking air suspension system. Left unchecked, a bad suspension can cause other components to wear out and total failure will set in. The most noticeable sign is a sudden uneven height difference between different sides of the Bonneville. Usually, the rear will sag first while the front end remains inflated. This gives the illusion the Bonneville is squatting down too low to the ground. Some drivers notice a lean from one side to the other. All of these symptoms are red flags. The air compressor may have stopped working or may run too often (will be very loud and noisy), in which case a replacement is needed. A bad suspension is confirmed if you see an illuminated suspension warning light on the instrument cluster. There are plenty of options out there for repair, replacement, or direct replacement- either at the dealership or using aftermarket parts- but you need to make sure you are choosing the best quality option at the best price available.
OEM Replacement Cost
+Air Struts ($469/Air strut)
+ Air Shocks ($259/air shocks)
+ Compressor and Dryer Assembly ($320)
= TOTAL: Over $2,700 (and that doesnt even include replacing electronic components that are known to fail such as the height sensors).
Aftermarket Replacement Cost
+ Front Air Strut Assemblies ($469/pair)
+ Rear Air Strut Assemblies ($469/pair)
+ Compressor ($320)
+ Dryer Assembly ($40.00)
= TOTAL: Over $1,900 (and that still doesn't include replacing electronic components that are known to fail such as the height sensors).
Our air to non-air suspension conversion kit CA24F was created specifically for the 91-99 Pontiac Bonneville. When the original air suspension system goes bad, our conversion kit offers an affordable direct replacement solution that delivers high quality and is installed easily. This kit eliminates depending on the assorted parts of the original system working properly and in sync, forever! The kit includes two premium rear shocks, two rear springs and two pre-assembled complete front strut assemblies including springs and mounts needed for installation. This is the only kit of its kind that includes high-quality cold-wound steel springs. DIYers love that it is installed in as little as one hour per wheel, and comes with a detailed instruction manual. Read our positive customer reviews to get firsthand feedback on just how much time, frustration, and money this conversion kit will save you.