IN STOCK & SHIPS FAST!
Monday - Friday: 8 AM - 9 PM
Saturday: 9 AM - 6 PM
- Why Strutmasters
- OEM Numbers
Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...Strutmasters 1989-1993 Dodge Dynasty Front Air Suspension Conversion Kit With Shocks is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use standard shocks/struts for the price of one air shock.
Conversion Kit Features
- Saves Money
- All New Components
- More Reliable Than Air Suspensions
- No Modifications Required To Install
- Easy To Install
- Premium Eibach Springs
Air Suspension Conversion Kit Includes
- 2 Eibach Springs
- 2 Rear Shocks
- All Necessary Hardware to Include Mounts
- Detailed Instructions
This Conversion Kit Fits1989 Dodge Dynasty, 1990 Dodge Dynasty, 1991 Dodge Dynasty, 1992 Dodge Dynasty, 1993 Dodge Dynasty
The 1989-1993 Dodge Dynasty is built with the following suspension components: 1989-1993 Dodge Dynasty Air/Electronic/Magnetic Shock Absorbers (x2)- shocks that contain an air bladder or magnets whose dampening capabilities are controlled by the suspension control module. 1989-1993 Dodge Dynasty Air Struts (x2)- struts that contain an air bladder whose dampening capabilities is controlled by the suspension control module; these have two functions. They connect the wheel of a vehicle to the driving surface in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. They also help maintain the vehicles correct ride height, especially whenever the amount of load put onto the vehicle changes. 1989-1993 Dodge Dynasty Air Springs (x2)- commonly referred to as air bags, a plastic and rubber bag that is fitted on top of the strut that uses pressurized air as a cushion instead of a metal coil spring to hold a vehicle off of the ground and off of its wheels. These are the number one cause of all air suspension leaks. All air springs all go bad at about the same rate. If one is leaking, the others will not be far behind. For a proper repair, all of them need to be replaced at the same time. 1989-1993 Dodge Dynasty Height Sensors (x2)- a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out. 1989-1993 Dodge Dynasty Air Lines- tubes that run from a compressor (air suspension) to the air struts which carry pressurized air to the air bags components in order to adjust the height of the vehicle, respectively. 1989-1993 Dodge Dynasty Compressor- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive. 1989-1993 Dodge Dynasty Dryer Assembly- used to keep moisture out of air lines and air springs in order to prevent freezing and internal cracking of these parts. Once air suspension starts leaking, moisture will build-up throughout the air system. Moisture damages the air suspension from the inside. The dryer will need to be replaced in order to eliminate the moisture and prevent any further damage. 1989-1993 Dodge Dynasty Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicle‚Äôs correct ride height. 1989-1993 Dodge Dynasty O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.
Suspension Failure Signs
A sudden noticeable uneven height difference on different sides of your 1989-1993 Dodge Dynasty could point to a failed or leaking air suspension. There are a few other classic signs you should know about when diagnosing your bad suspension. The Dynasty might be sagging at the rear or front, it could be leaning to the left or right side, one area might look overly inflated, or maybe the entire Dynasty looks like it‚Äôs squatting down lower than it should. If you suspect your suspension has gone bad, your Dynasty will no longer be able to reach or maintain its appropriate ride height. You will need to get it fixed ASAP, with either a repair or replacement suspension system. A couple other signs can tell you if you have suspension total failure. One is if there is an illuminated suspension warning light or message on the instrument cluster. Another is if the air compressor is running way too often (will be very noticeable and noisy) or no longer working at all. You have a few options, including repair, replacement, or direct replacement.