IN STOCK & SHIPS FAST!
Monday - Friday: 8 AM - 9 PM
Saturday: 9 AM - 6 PM
- Why Strutmasters
- OEM Numbers
Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...Strutmasters 1993-1998 Cadillac Eldorado Rear Air Suspension Conversion Kit is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use standard shocks/struts and coil springs for less than the price of replacing one air strut.
Conversion Kit Features
- Saves Money
- All New Components
- Improved Ride
- More Reliable Than Air Suspensions
- No Modifications Required To Install
- Easy To Install
Air Suspension Conversion Kit Includes
- All Necessary Hardware
- 2 Rear Coil Springs
- 2 Rear Shock Absorbers with new bushings
- Detailed Instructions
This Conversion Kit Fits1993 Cadillac Eldorado, 1994 Cadillac Eldorado, 1995 Cadillac Eldorado, 1996 Cadillac Eldorado, 1997 Cadillac Eldorado, 1998 Cadillac Eldorado
- Includes Electonic Bypass For Disabling The Suspension Warning Light.
- If the suspension warning light is currently on, call 866-597-2397 for more information prior to installation.
- Fits 4.9L Models Only!
The 1993 Cadillac Eldorado is built with the following suspension components:
1993 Cadillac Eldorado Shock Absorbers (x2)- a metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle.
1993 Cadillac Eldorado Coil Springs (x2)- Coil springs hold the vehicle up but be careful, they are rated for and designed to work with the rest of the suspension system, so when you change air shocks to passive shocks, then you will need a different rated coil spring that works well with the new type of shocks.
1993 Cadillac Eldorado Height Sensors (x2)- a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out.
1993 Cadillac Eldorado Air Lines- tubes that run from a compressor (air suspension) to the air struts which carry pressurized air to the air bags components in order to adjust the height of the vehicle, respectively.
1993 Cadillac Eldorado Solenoids (x4)- usually L-shaped, these plastic components connect the electrical connection and lines of suspension components to the suspension control module on vehicles with active suspension. The solenoid regulates the air pressure for each air spring. Solenoids start to leak as they wear out causing the vehicle to sag or to lean. This will cause the ride height sensor to send a signal to activate the compressor in an attempt to inflate the air suspension and level out the vehicle. This excessive work load will eventually lead to total failure of the compressor.
1993 Cadillac Eldorado Compressor- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive.
1993 Cadillac Eldorado Dryer Assembly- used to keep moisture out of air lines and air springs in order to prevent freezing and internal cracking of these parts. Once air suspension starts leaking, moisture will build-up throughout the air system. Moisture damages the air suspension from the inside. The dryer will need to be replaced in order to eliminate the moisture and prevent any further damage.
1993 Cadillac Eldorado Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicle's correct ride height.
1993 Cadillac Eldorado O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.
Suspension Failure Signs
A failed or leaking air suspension system on the 1993-1998 Cadillac Eldorado 4.9L will cause a few classic symptoms to surface. Look for a sudden height variance between different sides of the Eldorado. One end may sag while the other end remains inflated. There may be a ‚Äúsquatting down‚Äù appearance. There may be a shifting lean from one side to the other. Height imbalances place extra strain on the air compressor, so eventually, it will wear out. An improperly working air compressor is a major red flag. If suspension failure is advanced, a suspension warning light will illuminate on the dashboard. The Eldorado owner should have any suspension issue fixed as soon as it's noticed.
The various components that make up the air suspension system on the 1993 Cadillac Eldorado must always function in unison. When one part stops working, the rest follow suit. Strutmasters' air to non-air suspension conversion kit eliminates this reliance for good. The kit, made in the USA, comes complete with two rear springs, new mounts, two premium shocks, and one electronic bypass that removes the service ride control message. Customers appreciate that the kit is installed in as little as one hour per wheel. Detailed instructions and online installation videos offer precise directions that are easy to follow. The quality of the parts is guaranteed by Strutmasters' 1-year warranty. The kit was designed to save customers time, frustration, and a lot of money. In fact, the low price of the kit may be its most appealing feature. The kit costs a fraction of the price of dealership direct replacement and individual part replacement.