The 2000-2006 BMW-Compatible X5 4.4i and 4.8L 4 Wheels Air Suspension Conversion Kit (BB14GB2) is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use passive shocks and coil springs for less than the price of replacing one original equipment air spring.
$889.00 In Stock Sold out
IN STOCK & SHIPS FAST!
Need assistance buying the right part? Speak to an expert now.
Monday - Friday: 8 AM - 9 PM
Monday - Friday: 8 AM - 9 PM
Saturday: 9 AM - 6 PM
This product is vehicle specific.
Select a vehicle to ensure fitment.
- Why Strutmasters
- OEM Numbers
Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...Strutmasters 2000-2006 BMW X5 4 Wheel Air To Coil Spring Conversion System is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your ENTIRE air suspension to use our exclusive premium steel coil springs and passive struts for LESS than the price of replacing just one component at the dealer.
Conversion System Features
- Saves Money
- All New Components
- Improved Ride
- More Reliable Than Air Suspensions
- No Modifications, Easy To Install
- Premium Steel Coil Springs
Air Suspension Conversion System Includes
- 2 Rear Premium Coil Springs including upper and lower spring mounting plates, hardware etc.
- 2 Front Full Assembled Coil-over Struts
This Product Fits2000 BMW X5, 2001 BMW X5, 2002 BMW X5, 2003 BMW X5, 2004 BMW X5, 2005 BMW X5, 2006 BMW X5
- This Kit Works With Vehicles That Have Air Suspension On All Four Corners.
- This Product does NOT have the suspension warning light elimination module.
- This product fits 4.8L and 4.4i models only.
The 2000-2006 BMW X5 4.4i & 4.8L is built with the following suspension components: 2000-2006 BMW X5 4.4i & 4.8L Air Springs (x2)- commonly referred to as air bags, a plastic and rubber bag that is fitted on top of the strut that uses pressurized air as a cushion instead of a metal coil spring to hold a vehicle off of the ground and off of its wheels. These are the number one cause of all air suspension leaks. All air springs all go bad at about the same rate. If one is leaking, the others will not be far behind. For a proper repair, all of them need to be replaced at the same time. 2000-2006 BMW X5 4.4i & 4.8L Struts (x2)- on some 4x4 models. A type of shock absorber, it is a piece of metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle. 2000-2006 BMW X5 4.4i & 4.8L Air Lines- tubes that run from a compressor (air suspension) to the air struts which carry pressurized air to the air bags components in order to adjust the height of the vehicle, respectively. 2000-2006 BMW X5 4.4i & 4.8L Compressor- creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive. 2000-2006 BMW X5 4.4i & 4.8L Dryer Assembly- used to keep moisture out of air lines and air springs in order to prevent freezing and internal cracking of these parts. Once air suspension starts leaking, moisture will build-up throughout the air system. Moisture damages the air suspension from the inside. The dryer will need to be replaced in order to eliminate the moisture and prevent any further damage. 2000-2006 BMW X5 4.4i & 4.8L Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicles correct ride height. 2000-2006 BMW X5 4.4i & 4.8L O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.
Suspension Failure Signs
If your BMW X5 is not meeting and maintaining its proper ride height, it‚Äôs time you investigate further for signs of a bad or leaking air suspension system. You will want to properly diagnose a bad suspension before total failure sets in. Other vehicle components will wear out if the situation is not fixed. The most noticeable sign is a sudden uneven ride height between different sides of the X5 4.4i & 4.8L. Typically the rear will sag first while the front end remains inflated. This squatting down appearance, along with any leaning from one side to the other, should not be taken lightly. If the air compressor has stopped working or is running too often (very loud and noticeable) then it may already need replacement. Confirm the air suspension needs repair if there is an illuminated suspension warning light or message on the instrument panel. You have options- direct replacement, repair, replacement- but you will need to act quickly.
OEM Replacement Cost
- + Rear Air Struts ($469/strut)
- + Front Air Struts ($469/strut)
- = TOTAL: Over $2,159 (and that doesn't even include replacing electronic components that are known to fail such as the height sensors).
Strutmasters' air to non-air suspension conversion kit was built specifically for the 2000-2006 BMW X5 4.4i & 4.8L. It was designed with the DIYer in mind, with the goal of saving time, money and frustration. The relatively low price is the main reason most of our customers make the switch from air to non-air when the suspension system has failed. Our conversion kit is made of only the highest quality parts on the market. It eliminates dependence on expensive and complicated electrical components that need constant repair at the BMW dealership. This kit includes two rear premium coil springs with upper and lower spring mounting plates, and two front coil-over struts. This is the only kit of its kind on the market that includes premium cold-wound steel premium coil springs. It is installed in about one hour per wheel, and couldn't be easier.
37116757502, 37116761444, 37116757501, 37116761443, 37121095580, 37121095579, 33526761928, 33526764875