2000-2006 Mercedes-Benz S600 V12 Model 4-Wheel Hydraulic Suspension Conversion Kit With Light Fix (MZ14FM)
IN STOCK & SHIPS FAST!
Monday - Friday: 8 AM - 9 PM
Saturday: 9 AM - 6 PM
- Why Strutmasters
- OEM Numbers
Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...Strutmasters 2000-2006 Mercedes Benz S600 V12 Model 4 Wheel Hydraulic Suspension To Coil Spring Conversion Kit is the perfect solution to your hydraulic suspension problems. Designed to be very affordable, you can convert your suspension to use standard shocks/struts and coil springs for less than the price of replacing one air strut. Plus, all of our kits come with step-by-step instructions to ensure a smooth and easy installation.
Conversion Kit Features
- Saves Money
- All New Components
- Rides Great
- More Reliable Than Air Suspensions
- No Modifications Required To Install
- Easy To Install
- Premium Springs
Air Suspension Conversion Kit Includes
- 2 Front Struts
- 2 Front Springs
- 2 Rear Struts
- 2 Rear Springs
- Light Out Module
- Detailed Installation Instructions
This Conversion Kit Fits2000 Mercedes S600 V12 Model, 2001 Mercedes S600 V12 Model, 2002 Mercedes S600 V12 Model, 2003 Mercedes S600 V12 Model, 2004 Mercedes S600 V12 Model, 2005 Mercedes S600 V12 Model, 2006 Mercedes S600 V12 Model
- Fits V12 models only
- Fits the W220 Chassis
- Kit DOES NOT fit 4-Matic models with all-wheel drive
- If you do not need the warning light module, order kit MZ14F
The 2000-2006 Mercedes S600 V12 Model is built with the following suspension components:
2000-2006 Mercedes S600 V12 Model Hydraulic/Air Springs (x4)- (models with air suspension only). Commonly referred to as air bags, a plastic and rubber bag that is fitted on top of the strut that uses pressurized air as a cushion instead of a metal coil spring to hold a vehicle off of the ground and off of its wheels. These are the number one cause of all air suspension leaks. All air springs all go bad at about the same rate. If one is leaking, the others will not be far behind. For proper repair, all of them need to be replaced at the same time. If your model has hydraulic springs/struts, then it is filled with hydraulic fluid instead of air to adjust the height and suspension dampening of the vehicle.
2000-2006 Mercedes S600 V12 Model Hydraulic Reservoirs (x4)- (models with hydraulic active suspension). If your model of Mercedes-Benz has this, then the steering pump also pushes hydraulic fluid to your
2000-2006 Mercedes S600 V12 Model Struts (x4)- a type of shock absorber; has metal tubing filled with gas-charged hydraulic fluid that is connected to the wheel of a vehicle in order to reduce the effects of vertical travel on a rough surface which controls the bounciness, and therefore comfort, of a vehicle.; the air spring assembled on top of the strut is commonly referred to as an air strut.
2000-2006 Mercedes S600 V12 Model Height Sensors (x4)- a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, it will eventually wear out.
2000-2006 Mercedes S600 V12 Model Air/Hydraulic Lines- tubes that run from a compressor to the air struts (or a hydraulic pump to the hydraulic struts for models with hydraulic active suspension), which carry pressurized air to the air bags (or hydraulic fluid to hydraulic struts) in order to adjust the height of the vehicle, respectively.
2000-2006 Mercedes S600 V12 Model Solenoids (x4)- usually L-shaped, these plastic components connect the electrical connection and lines of suspension components to the suspension control module on vehicles with active suspension. The solenoid regulates the air pressure for each air spring. Solenoids start to leak as they wear out causing the vehicle to sag or to lean. This will cause the ride height sensor to send a signal to activate the compressor in an attempt to inflate the air suspension and level out the vehicle. This excessive work load will eventually lead to total failure of the compressor.
2000-2006 Mercedes S600 V12 Model Compressor Assembly- (models with air suspension only). Creates/sends pressurized to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive.
2000-2006 Mercedes S600 V12 Model Hydraulic Pump- if your Mercedes has hydraulic suspension instead of air suspension, then the hydraulic steering pump will also serve as the reservoir for the hydraulic fluid going into the struts.
2000-2006 Mercedes S600 V12 Model Suspension Control Module- a computer that is responsible for the operations of the air suspension system and maintaining the vehicle's correct ride height.
2000-2006 Mercedes S600 V12 Model O-rings- Although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.
Suspension Failure Signs
Look for these classic indicators that the air suspension system is going bad in the 2000-2006 Mercedes S600 V12 Model. An inability of the S600 to reach and maintain its proper ride height is one major red flag. A height variance between different sides of the vehicle is also a symptom of a failed suspension (this may look like one sagging end or a shifting lean from side to side). Height imbalances, if not fixed promptly, will wear out the air compressor. Once the air compressor has stopped working, a suspension warning light will illuminate on the dashboard. At this late stage, any repair or replacement will be costly. The S600 owner should detect suspension failure early to avoid this worst-case scenario.
OEM Replacement Cost
- Air/Hydraulic Strut Assemblies ($2,000/strut) ) +
- Air Compressor Assembly ($380) Or + Hydraulic Pump ($1,300) +
- Hydraulic Reservoir ($40)
Aftermarket Replacement Cost
New aftermarket struts are not available for models with Active Body Control (ABC) suspension.
The wide array of parts that comprise the air suspension system on the 2000-2006 Mercedes-Benz S600 V12 Model must always work together. When one part stops working, the rest follow suit. Strutmasters' air-to-non-air suspension conversion kit eliminates this reliance for good. The kit, manufactured in the USA, comes complete with one custom-designed suspension light fix module and four pre-assembled coilover struts.
Customers appreciate that the kit can be installed in as little as one hour per strut with just four bolts each. Detailed instructions and online installation videos help guide a smooth repair process. If further assistance is needed, Strutmasters' ASE-certified experts are happy to provide technical support over the phone. The quality of the parts is guaranteed by Strutmasters' 1-year warranty. But perhaps the low price is most appealing to customers; the kit costs a fraction of the price of dealership direct replacement and individual part replacement.