The 2007-2008 Mercedes R320 CDI 4-Wheel Air Suspension Conversion Kit (MR14G) is the perfect solution to your air suspension problems. Designed to be very affordable, you can convert your air suspension to use passive shocks and coil springs for less than the price of replacing one original equipment air spring.
$959.00 In Stock Sold out
IN STOCK & SHIPS FAST!
Need assistance buying the right part? Speak to an expert now.
Monday - Friday: 8 AM - 9 PM
Monday - Friday: 8 AM - 9 PM
Saturday: 9 AM - 6 PM
This product is vehicle specific.
Select a vehicle to ensure fitment.
- Why Strutmasters
- OEM Numbers
THIS KIT FITS
- 2006 MERCEDES R320 CDI
- 2007 MERCEDES R320 CDI
- 2008 MERCEDES R320 CDI
Convert Your AIR Suspension To A Coil Spring SuspensionEnd Your Suspension Problems Forever...Strutmasters 2007-2008 Mercedes-Benz R320 CDI 4-Wheel Conversion Kit is the perfect solution to your suspension problems. Designed to be very affordable, you can convert your suspension to use standard shocks and coil springs for less than the price of replacing one Air Spring. KIT CLASS: PREMIUM WARRANTY: LIFETIME Limited
- Saves Money
- Replaces Your Rear Air System
- All New Components
- Rides Great
- No Modifications Required To Install
- Easy To Install
- Premium Springs
- 2 Rear Shocks
- 2 Rear Springs
- 2 Front Coilover Struts Preloaded with Springs
- New Mounts
- All Necessary Hardware
- Detailed Instructions
- This kit does NOT include the module to remove the suspension warning light.
The 2007-2008 Mercedes Benz R320 CDI is built with the following rear suspension components: 2007-2008 Mercedes Benz R320 CDI Electronic Shocks (x2)- shocks whose dampening capabilities are controlled by the suspension control module. 2007-2008 Mercedes Benz R320 CDI Air Springs (x2)- commonly referred to as air bags, a plastic and rubber bag that is fitted on top of the strut that uses pressurized air as a cushion instead of a metal coil spring to hold a vehicle off of the ground and off of its wheels. These are the number one cause of all air suspension leaks. All air springs all go bad at about the same rate. If one is leaking, the others will not be far behind. For a proper repair, all of them need to be replaced at the same time. 2007-2008 Mercedes Benz R320 CDI Height Sensors (x2)- a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, they will eventually wear out. 2007-2008 Mercedes Benz R320 CDI Air Lines- tubes that run from a compressor to the air springs, which carry pressurized air to the air bags. 2007-2008 Mercedes Benz R320 CDI Solenoids (x2)- usually L-shaped, these plastic components connect the electrical connection and lines of suspension components to the suspension control module on vehicles with active suspension. The solenoid regulates the air pressure for each air spring. Solenoids start to leak as they wear out causing the vehicle to sag or to lean. This will cause the ride height sensor to send a signal to activate the compressor in an attempt to inflate the air suspension and level out the vehicle. This excessive work load will eventually lead to total failure of the compressor. 2007-2008 Mercedes Benz R320 CDI Compressor Assembly- creates/sends pressurized air to active suspension components. When the air suspension starts leaking, the compressor/pump starts working harder to try to keep the system inflated. By the time air suspension leaks down completely, sitting the vehicle on its tires, the compressor will either have failed or be well on its way to full failure. Buying replacement struts and taking the time to install them only to find out the compressor still needs to be replaced can be very frustrating, time-consuming, and expensive. 2007-2008 Mercedes Benz R320 CDI Suspension Control Module- a computer which is responsible for the operations of the air suspension system and maintaining the vehicles correct ride height. 2007-2008 Mercedes Benz R320 CDI O-rings- although they are the least expensive parts of the air suspension, they are responsible for maintaining the seal where all of the air lines connect. Be sure to replace the O-rings when repairing any air suspension system.
Suspension Failure Signs
Early detection of a failed or leaking air suspension system is critical to avoiding total failure. Look for the following signs in the 2007-08 Mercedes-Benz R320 CDI, which indicate the suspension is going bad. Any variance in ride height is a red flag. Look for an overall improper ride height, one sagging end, one inflated end, a shifting lean from side to side, or a ‚Äúsquatting‚Äù down appearance. These imbalances can wear out the air compressor. If the air compressor runs too often or has stopped working already, then suspension failure is advanced. At this point, a suspension warning light will illuminate on the instrument cluster. The R320 owner should get any suspension issue fixed promptly.
OEM Replacement Cost
'+ Front Struts ($496/strut) + Front Air Spring ($350/spring) + Front Mounts ($43/mount) + Rear Electronic Shocks ($740/shock) + Rear Air/Hydraulic Spring ($430/spring) + Air Compressor Assembly ($540) = TOTAL: Over $4,500 (and that doesnt even include replacing electronic components that are known to fail such as the height sensors).
Aftermarket Replacement Cost
'+ Front Air Struts ($675/strut) + Rear Electronic Shocks ($110/shock) + Rear Air/Hydraulic Spring ($190/spring) + Air Compressor Assembly ($680) = TOTAL: Over $2,600 (and that doesn't even include replacing electronic components that are known to fail such as the height sensors).
When one component of the original air suspension system fails, the rest of the system stops working properly. Strutmasters' air to non-air suspension conversion kit was designed to save the R320 CDI owner time, frustration, and money when the air suspension system fails. This kit, made in America, includes two new coil springs with mounts and two passive hydraulic fluid and gas shocks. Typically the kit is installed in about one hour per wheel, thanks to detailed instructions and online installation videos. ASE certified technicians are available over the telephone if extra assistance is required. Strutmasters is proud to offer its 1-year warranty with each kit we sell. Lastly, this coilover conversion kit is considerably less expensive than dealership direct replacement and individual aftermarket part replacement.
251320571380, 251320561360, 2513205613, 251320571360, 251320571388, 251320561388, 2513203013, 2513203113, 251320561380, 2513205713, 251320301380, 251320311380, 2513201613, 2513200325, 2513200425, 2513200025, 2513203031, 2513201931, 2513201031, 2513203431, 2513200731, 2513201331, 2513202131